Cart 2 india

Specification
Brand : Eujgoov
BulletPoint1 : SPECIFICATION: The turbine water flowmeter sensor has 3in male thread interface, the working voltage range is DC5-18V, and the output NPN pulse , water pressure resistances is 1.75MPa
BulletPoint2 : STABLE PERFORMANCE: The turbine flows meter is stable in operation, resistant to high temperature, and can be started at low water pressure, with strong practicability
BulletPoint3 : USE PRINCIPLE: When the water passes through, the magnetic rotor rotates and the speed changes, the sensor outputs the corresponding pulse and feeds it back to the controller to judge the water flows, water flows switch is ideal choice for using and replacing
BulletPoint4 : EASY INSTALLATION: The water flows sensor is light in weight and small in size, with standard size and good sealing, easy to install and does not take up space
BulletPoint5 : APPLICATION: 3in male thread flowmeter can be used in water heaters, credit card machines, water vending machines, flows measurement equipment, etc, widely used in your work and life
Color : One Color
ExternallyAssignedProductIdentifier : 7689310070007
ExternallyAssignedProductIdentifier1 : 0750872671050
ExternallyAssignedProductIdentifier2 : 750872671050
IncludedComponents : No
ItemName : Water Flows Sensor 3in Turbine Water Flows Sensor, Water Flows Switch Flowmeter Induction Switch NPN Output Liquid Flows Meter for Water Vending Machines
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-flow-sensors
Manufacturer : Eujgoov
ModelName : Eujgoovtx1ym2ba0d
ModelNumber : Eujgoovtx1ym2ba0d
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Eujgoovtx1ym2ba0d
ProductDescription : 1. USE PRINCIPLE: When the water passes through, the magnetic rotor rotates and the speed changes, the sensor outputs the corresponding pulse signal and feeds it back to the controller to judge the water flows.
2. SENSOR SPECIFICATION: The turbine water flows sensor has 3in male thread interface, the working voltage range is DC5-18V, and the output NPN pulse signal.
3. EASY INSTALLATION: The water flows sensor is light in weight and small in size, with standard size and good sealing, easy to install and does not take up space.
4. GOOD PERFORMANCE: The water flowmeter sensor is stable in operation, resistant to high temperature, and can be started at low water pressure, with strong practicability.
5. MULTIPLE USAGES: Can be used in water heaters, credit card machines, water vending machines, flows measurement equipment, etc., with a wide range of applications.

Spec:
Item Type: Water flows Sensor
Material: Aluminum
Surface Treatment: Electroplating
Output Signal: Output NPN Pulse Signal
Model: YF -DN80
Interface Size: 3in Male Thread
Working Voltage Range: DC5-18V
Inner Diameter: Approx. 77mm / 3in
Outer Diameter: Approx. 87mm / 3.4in
Thread Length: Approx. 21mm / 0.8in
Water Pressure Resistances: 1.75MPa
Output Pulse High Level: >DC 4.5V (input voltage DC 5V)
Output Pulse Duty Cycle: 50%±10%
Load Capacity: ≤10mA (DC5V)
Insulation Resistances: >100MΩ
flows Range: 20~500L/MIN
Airtightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation
flows Pulse Characteristics: F=(0.5 x Q)±3%, F is frequency, Q is L/Min

Package List:
1 x Water flows Sensor

Notice:
1. Severe impact and chemical erosion are strictly prohibited.
2. Throwing or collision is strictly prohibited.
3. Install in the direction of the
ProductSiteLaunchDate : 2024-11-18T11:53:30.878Z
Size : 2"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52150000