Cart 2 india

Specification
Brand : Scientific Americas
BulletPoint1 : Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface.
BulletPoint2 : Construction: Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412
BulletPoint3 : Tensile Strength: Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624
BulletPoint4 : Abrasion Resistance: Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous
BulletPoint5 : Resistance to degradation by inorganic acids, organic acids, reducing agents, Aliphatic hydrocarbons, mineral oil, aldehydes, and amines
BulletPoint6 : CAN BE WRUNG OUT AND INCINERATED after use to reduce waste or fuels blending
Color : Grey
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0674023714482
ExternallyAssignedProductIdentifier2 : 674023714482
ExternallyAssignedProductIdentifier3 : 00818362021355
IncludedComponents : 100 Stat-Mat Absorbent Mat Pads
ItemDisplayDimensions_Length : 36 inches
ItemDisplayDimensions_Width : 36 inches
ItemName : Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 96" (2.5'x 8') - 0.125" Thick- with Dual Bench and Wrist Strap-Gray
ItemPackageDimensions_Height : 127 centimeters
ItemPackageDimensions_Length : 24.638 centimeters
ItemPackageDimensions_Width : 31.75 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : floor-mats-and-matting
Manufacturer : Scientific Americas
Material : Vinyl
ModelNumber : A71040602
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 2080-30X96RB
Pattern : Solid
PileHeight : Low Pile
ProductDescription : 30" X 96'' Vinyl Mat. Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage. Available in Gray. Grounding: This material must be properly grounded for optimum electrical performance. You may use our Grounding cord Cleaning: Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Dual Bench Ground Mount for Single Conductor Wrist Straps This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
ProductSiteLaunchDate : 2018-05-31T07:00:00.000Z
Size : 30"x 96"
StreetDate : 2017-12-13T00:00:01Z
Style : Traditional
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1