Cart 2 india

Specification
Brand : Scientific Americas
BulletPoint1 : Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface.
BulletPoint2 : Construction: Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412
BulletPoint3 : Tensile Strength: Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624
BulletPoint4 : Abrasion Resistance: Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous
BulletPoint5 : Resistance to degradation by inorganic acids, organic acids, reducing agents, Aliphatic hydrocarbons, mineral oil, aldehydes, and amines
Color : Grey
ExternallyAssignedProductIdentifier1 : 0674023714215
ExternallyAssignedProductIdentifier2 : 674023714215
ExternallyAssignedProductIdentifier3 : 00818502024994
IncludedComponents : Grounding Cord
ItemName : Three Layer Dissipative Vinyl Anti-Static ESD Mat -24" X 60" (2'x 5') - 0.125" Thick- with Dual Bench and Wrist Strap-Gray
ItemPackageDimensions_Height : 12.75 inches
ItemPackageDimensions_Length : 19.25 inches
ItemPackageDimensions_Width : 15.25 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : floor-mats-and-matting
Manufacturer : Scientific Americas
Material : Vinyl
ModelNumber : YPZ100M-BX
NumberOfItems : 1
PartNumber : 24x60-VDB-GR
Pattern : Solid
ProductDescription : 24" X 60'' Vinyl Mat. Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage. Available in Gray. Grounding: This material must be properly grounded for optimum electrical performance. You may use our Grounding cord Cleaning: Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Dual Bench Ground Mount for Single Conductor Wrist Straps This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
ProductSiteLaunchDate : 2018-05-31T07:00:00.000Z
Size : 24"x 60"
StreetDate : 2018-05-22T00:00:01Z
UnitCount : 1