Cart 2 india

Specification
Brand : Hyuduo
BulletPoint1 : 【Simple Installation】The Water Tanks Valve has exquisite appearance, small size, convenient use and simple installation. It is best to tighten the nut with your own spanner, not by hand. Package contains a control valve *1.
BulletPoint2 : 【Stable Performance】The Floating Ball Valve can replace the traditional floating ball valve with high reliability. Location of use for water tanks, sinks, water towers. Hard shell, compared with other float valves, stainless steel shell higher melting point.
BulletPoint3 : 【Wide Range of Use】The G1/2in Float Valve is suitable for various systems such as industrial high water tanks, pools, water towers and civil buildings. If two valves are installed in the same pool, they should be kept at the same level.
BulletPoint4 : 【Easy to Use】The automatic water control valve does not require electricity, is easy to use, has a long service life, low failure rate, and saves water resources. 304 stainless steel material, compact body, effectively increase the drainage capacity.
BulletPoint5 : 【Easy to Use】The valve hole of the Float Valve adopts three-hole three-dimensional induction, which makes water supply and water injection more timely. The bottom of the three-hole induction design, greatly increasing the contact surface of the internal float and the water surface, easy to pinch the rising and lowering water.
Color : Chrome
ConnectorType : Flanged
CustomerPackageType : Standard Packaging
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8480685372487
ExternallyAssignedProductIdentifier1 : 0783347015059
ExternallyAssignedProductIdentifier2 : 783347015059
IncludedComponents : inc
ItemName : 1/2in Float Ball Valve, Stainless Steel Automatic Water Water Level Control Valve with PTFE Tape Elbow for Water Tank Sink Tower Pools
ItemPackageDimensions_Height : 8.4074 centimeters
ItemPackageDimensions_Length : 5.6896 centimeters
ItemPackageDimensions_Width : 7.493 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-float-valves
Manufacturer : Hyuduo
Material : Plastic
ModelName : Midline Valve SBWIB18-5
ModelNumber : Hyuduoogp13n4kdh
NumberOfBoxes : 1
NumberOfItems : 5
NumberOfPorts : 1
PartNumber : Hyuduoogp13n4kdh
ProductDescription : Specification:
Condition: 100% brand new Item Type: Floating ball valve Material: Stainless steel Color: As pictures shown Use Location: Water tank, water sink, water tower Thread Size: G1/2in Maximum Installation Tilt: 30 degrees Working Pressure Range: ≤1.0MPa Residential Tap Water Pressure: 0.3-0.5Mpa Using siphon pipes for water supply needs to ensure that the water level drop is greater than 80cm / 31.5in, otherwise it will affect the water output Applicable Medium Temperature: ≤1-80℃ Medium Temperature of High Temperature Resistance: -20℃-100℃ Package List:
1 x Control Valve Note:
If two valves are installed in the same pool, they should be kept on the same level. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
ProductSiteLaunchDate : 2020-09-02T02:03:52.125Z
Style : 1/8" Angle Mount
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve