Cart 2 india

Specification
BatteriesRequired : 1
Brand : Usmile
BulletPoint1 : Wide Operating Voltage Range: The power distribution board supports a broad input range from 6V to 55V, making it compatible with various power sources, including 2S-12S batteries. This flexibility ensures reliable operation across multiple applications.
BulletPoint2 : Stable Output and High Load Capacity: It provides a stable 5.2V output on the "5V" pin/pads, with the ability to handle total 4A Continuous load current(1A for each JST-GH port), ensuring robust power delivery for demanding devices.
BulletPoint3 : 100% Maximum Duty Cycle:The board can achieve a maximum duty cycle of 100%, where the regulator output voltage equals the input voltage when the input is below the set value. This feature ensures efficient power management and utilization.
BulletPoint4 : Built-In Safety Features:The board includes short-circuit tolerance for up to 3 seconds, protecting connected devices from potential damage during brief overloads. However, it lacks reversed input polarity protection, so careful connection is required.
BulletPoint5 : Compact and Lightweight Design:*With dimensions of 38 x 26 x 7.8mm and a weight of only 12g, this power distribution board is highly portable and easy to integrate into various setups. It also comes with a convenient JST-GH 4-pin connector and a 20cm silicon wire for straightforward installation.
Color : Color: Mark4 7inch Frame
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier1 : 0735980953601
ExternallyAssignedProductIdentifier2 : 735980953601
IncludedComponents : 1x CANPDB-4A, 1x JST-GH-4P to JST-GH-4P 20cm silicon wire
ItemName : Matek CANPDB-4A 6V-55V Input (2S-12S) CAN Power Distribution Board PDB with 5X CAN-H/CAN-L for FPV Carbon Fiber FPV Racing Drone Quad Quadcopter Frame
ItemPackageDimensions_Height : 0.37 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemTypeKeyword : hobby-rc-vehicle-flight-gyroscopes_and-governors
ItemTypeName : Power distribution board
Manufacturer : Matek
ManufacturerMaximumAge : 840
ManufacturerMinimumAge : 144
Material : PCB
ModelName : CANPDB-4A
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CANPDB-4A
ProductDescription : 6V to 55V Operating Input Range(2S-12S battery)
5.2V output on “5V” pin/pads
Support total 4A Continuous load current. 1A for each JST-GH port
Maximum Duty Cycle: 100%, when input voltage< setting value, Regulator output voltage = Input voltage
No protection for reversed input polarity
Output Short-circuit tolerant (3 seconds)
5x CAN-H/CAN-L are in parallel
CAN port connector: JST-GH 4pin(SM04B-GHS-TB)
Size & Weight: 38 x 26 x 7.8mm, 12g
Package includes: 1x CANPDB-4A, 1x JST-GH-4P to JST-GH-4P 20cm silicon wire

ProductSiteLaunchDate : 2024-05-29T02:26:17.517Z
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : Men
TargetAudienceKeyword2 : Women