Cart 2 india

Specification
BatteriesRequired : 1
Brand : 双葉電子工業(FUTABA DENSHI)
BulletPoint : Small, ultra-lightweight 1-axis gyro for heliladers
BulletPoint1 : Size: 16 * 12 * 7.0MM
BulletPoint2 : Plug type: ZH1.5
BulletPoint3 : Working voltage: 3.7-8.4V
BulletPoint4 : Working temperature: -10°C~50°C
BulletPoint5 : Dual sensitivity mode: Master sensitivity mode/Stable anti shake mode
Color : Black
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 4513886036125
ExternallyAssignedProductIdentifier1 : 0735980953601
ExternallyAssignedProductIdentifier2 : 735980953601
IncludedComponents : Micro Gyroscope
IncludedComponents1 : 1x Gimbal Controller
IncludedComponents2 : 1x Sensor and Cable
ItemName : Futaba Denshi GYRO GY470 00107314-3
ItemPackageDimensions_Height : 8.3 centimeters
ItemPackageDimensions_Length : 3.8 centimeters
ItemPackageDimensions_Width : 6.4 centimeters
ItemTypeKeyword : hobby-rc-vehicle-flight-gyroscopes and-governors
Manufacturer : 双葉電子工業(Futaba Denshi)
ManufacturerMinimumAge : 180
Material : Plastic
ModelName : G068
ModelNumber : 00107314-3
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 00107314-3
PowerSourceType : electric
ProductDescription : Specifications:
100% Brand New
Size: 16 * 12 * 7.0MM
Plug type: ZH1.5
Working voltage: 3.7-8.4V
Working temperature: -10°C~50°C
Dual sensitivity mode: Master sensitivity mode/Stable anti shake mode

Setting and usage instructions
Gyroscope steering stroke (EPA) setting:
Press and hold the SET button, turn on the power until the indicator light changes from red and blue flashing to constant light, and then release it. At this point, the gyroscope enters the EPA travel setting function. Rotate the remote control handwheel to the left to make the vehicle turn left to the desired angle, keep the handwheel still, and after 3 seconds, the direction will automatically return to the center. At this point, the left steering EPA stroke setting is successful; Rotate the remote control handwheel to the right again to make the vehicle turn right to the desired angle, keep the handwheel still, and after 3 seconds, the direction will automatically return to the center. At this point, the EPA travel setting for the right turn is successful. Turn off the power and restart to end the setup.

Sensitivity direction setting:
The sensitivity direction has been synchronized with the EPA travel setting, and following the left to right setting sequence is the correct direction

Gyroscope sensitivity adjustment and dual-mode selection:
The sensitivity of the gyroscope can be adjusted through the remote control knob channel. The range of travel from 0 to -100 is the high sensitivity mode (red light mode), and from 0 to+100 is the stable anti shake mode (blue light mode). Alternatively, you can adjust it through the potentiometer on the gyroscope module (where the horizontal sensitivity is 0, and the sensitivity increases as you go up or down). Note that after connecting the gyroscope sensitivity adjustment channel to the receiver, the potentiometer on the module cannot adjust the gyroscope sensitivity

ProductSiteLaunchDate : 2023-11-08T04:47:02.952Z
SafetyWarning : No Warning Applicbale
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Unisex Adult
TargetAudienceKeyword1 : Men
TargetAudienceKeyword2 : Women
TargetGender : unisex
Theme : Sport
UnspscCode : 60141000