Cart 2 india

Specification
Brand : Hobart
BulletPoint : This is a genuine OEM (Original Equipment Manufacturer) part.
BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. "
BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. "
BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
ExternallyAssignedProductIdentifier : 4976463278088
ExternallyAssignedProductIdentifier1 : 046843809868
ExternallyAssignedProductIdentifier2 : 0046843809868
ExternallyAssignedProductIdentifier3 : 00085311042857
IncludedComponents : Replacement Part
ItemDisplayDimensions_Length : 3 inches
ItemDisplayWeight : 1 pounds
ItemName : HOBART - 291236 SHAFT;5-1/2
ItemPackageDimensions_Height : 11 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : flexible-shafts
Manufacturer : HOBART
Material : WA wood
MaxInputSheetCapacity : 100
ModelName : RELIEF
ModelNumber : 537-318S
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 26-2845-291236
ProductDescription : HOBART - 291236 SHAFT;5-1/2
ProductSiteLaunchDate : 2011-06-15T09:48:30.222Z
Size : 直径19mm
StreetDate : 2021-10-23T00:00:01Z
Style : SSLEEVE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1