Cart 2 india

Specification
Brand : FIRST4MAGNETS
BulletPoint : SPECIFICATION: 40 packs of 24 pink magnets. 20mm x 7.5mm. 0.8 in. x 0.3 in.
BulletPoint1 : 5 meter [16. 4'] lengths.
BulletPoint2 : 19mm [0. 75"] wide x 0. 76mm [0. 03"] thick.
BulletPoint3 : Striped north-south magnetic field (3mm [0. 12"] pole pitch) to provide a secure grip.
BulletPoint4 : Yellow finish.
BulletPoint5 : No protective plating required.
Color : Pink
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8118900255825
ExternallyAssignedProductIdentifier1 : 5055641222569
ExternallyAssignedProductIdentifier2 : 05055641222569
ExternallyAssignedProductIdentifier3 : 00095421401000
ExternallyAssignedProductIdentifier4 : 00015377200007
IncludedComponents : Flexible Magnet Sheet(100)
ItemDisplayDimensions_Height : 4.8 inches
ItemDisplayDimensions_Length : 0.3 inches
ItemDisplayDimensions_Width : 3.6 inches
ItemDisplayWeight : 7.8 ounces
ItemName : Small Planning & Notice Board Magnets - Assorted (1 Pack of 24) (Pack of 40)
ItemPackageDimensions_Height : 2.73 millimeters
ItemPackageDimensions_Length : 142.93 millimeters
ItemPackageDimensions_Width : 10.15 millimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemShape1 : Triangular
ItemShape2 : Square
ItemTypeKeyword : industrial-flexible-magnets
ItemVolume : 413 fluid_ounces
Manufacturer : Magnet Expert®
Material : Ferrite
Material1 : Metal
Material2 : Rubber
MaximumWeightRecommendation : 3 kilograms
ModelName : F4M20-PINK-40
ModelNumber : F4M20-PINK-40
MountingType : Door Mount
NumberOfBoxes : 1
NumberOfItems : 40
NumberOfPieces : 1
PackageLevel : unit
PartNumber : F4M20-PINK-40
ProductDescription :

Perfect for demagnetizing tweezers, screwdrivers and other small tools and parts. It will also magnetize tools such as screwdrivers if you desire. This magnetizer has a high power to weight ratio and is housed in non-breakable plastic. It is a 120V AC intermittent use type, which features a 1-1/2" by 3" opening and is 300 watts. A necessary addition to any workbench.

Operating Instructions:

To Demagnetize:

• Hold the part to be demagnetized inside and in the center of the housing opening.
• Press the button down then slowly withdraw the part in a straight line from the housing opening for approximately three feet, keeping the part centered with the housing opening.
• Release the button.

To Magnetize:

• Hold the part to be magnetized inside and against the side of the housing opening.
• Press the button down for 4-5 seconds and release.

Duty Cycle (Intermittent):

The unit has superior field strength due to the relatively high amperage that it draws. The consequence is a fairly rapid heating of the field coil. It is recommended that a single duty cycle be limited to 5 seconds ON and 3 minutes OFF, or three 5 second cycles ON and 10 minutes OFF.

This unit is wired with a thermal protector. If the above duty cycles are not observed, the thermostat may open and the unit will not operate until it has cooled sufficiently. This unit is not intended for continuous duty.

ProductSiteLaunchDate : 2013-10-03T11:01:53.926Z
Size : Pack of 960
StreetDate : 2015-01-15T00:00:01Z
Style : Standard
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 40