Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
BulletPoint2 : 12mm / 0.47" O.D. x 6mm / 0.24" I.D. x 2mm / 0.08" Thick; Working Temperature Range: -200°C to 250°C (-328°F to 482°F)
BulletPoint3 : Draw rate: 193%; Density: 2.19g/cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
BulletPoint4 : The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
BulletPoint5 : Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
Color : White
ExteriorFinish : Polypropylene
ItemName : MECCANIXITY PTFE Flat Washers 12mm OD 6mm ID 2mm Thick 1/4 Inch Hole Flange Gasket, White Pack of 50
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 5.4 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : flat-washers
Manufacturer : MECCANIXITY
Material : Polytetrafluoroethylene
MetalType : Stainless Steel
ModelNumber : mea210430ee0263
NumberOfItems : 1
NumberOfPieces : 50
PartNumber : mea210430ee0263
ProductDescription : What will I get?Color: White
Material: PTFE (Polytetrafluoroethylene)
Outer Diameter: 12mm / 0.47 inch
Inner Diameter: 6mm / 1/4 inch
Thickness: 2mm / 0.08 inch
Draw rate: 193%
Density: 2.19 g/cm³
Shore Hardness: 50 A
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 KV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 12 Mpa
Working Temperature Range: -200°C to 250°C (-328°F to 482°F)
Package Contents: 50 x Spacer Gaskets

Are there any advantages of the product?With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, it is resistant to almost all chemical media and has wear resistance, pressure resistance, high voltage resistance, and a low friction coefficient.

What is this?
The sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components.

How to use it?
Mainly used in flange sealing as electrical insulation materials and linings in contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials in the chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
ProductSiteLaunchDate : 2021-08-13T09:14:53.608Z
Size : 8mm ID, 24mm OD, 2mm Thick
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 100
UnspscCode : 31161500
WasherType : Flat