Cart 2 india

Specification
Brand : PATIKIL
BulletPoint1 : Connector Material: Brass; Male Thread Size: 5/8 SAE Thread(Actual thread diameter is around 21.9mm); Female Thread Size: 1/2 SAE(Actual thread diameter is around 17.5mm); Hexagon Width: 24mm / 0.94 Inch; Total Length: 33mm / 1.30 Inch; Packing List: 2 Pcs x Brass Flare Tube Fitting, 1 Pcs x PTFE Tape
BulletPoint2 : Advantages: 1. Brass material always has good corrosion resistance, is not easy to deform, and is durable to use. 2. 45 degree flare thread connection design not only provides a good sealing performance but also helps you install and remove them easier.
BulletPoint3 : Instruction: Connect one end to a threaded pipe and connect the other end to a threaded pipe. And then seal the thread connection with the PTFE tape. Good replacement for repairing the leak of the pipeline.
BulletPoint4 : Application: This brass flare tube fitting is widely used in pipe connections for air conditioning, hydraulic and pneumatic systems, HVAC, automotive, humidifiers, grills, and fire pit. Also, the union fitting is suitable for fuel, gas systems, and refrigeration equipment. It can be used with copper, brass, aluminum, and other hydraulic tubes that can be flared.
BulletPoint5 : NOTE: Need to confirm your pipe size before ordering. 5/8 SAE Male Thread Fit for 7/8-14UNF Female Thread. 1/2 SAE Female Thread Fit for 3/4-16UNF Male Thread.
BulletPoint6 : These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Color : Brass
ConnectorType : Flare
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 786471302774
ExternallyAssignedProductIdentifier2 : 0786471302774
ExternallyAssignedProductIdentifier3 : 00719852935360
GpsrSafetyAttestation : 1
IncludedComponents : Steel JIC Fitting
ItemName : PATIKIL 5/8 SAE Male (7/8"-14UNF) x 1/2 SAE (3/4"-16UNF) Female Brass Flare Tube Fitting, 2 Pack Pipe Fitting Reducer Gas Adapter Hex Coupling with Tape for Plumbing HVAC
ItemPackageDimensions_Height : 16.5 centimeters
ItemPackageDimensions_Length : 4.3 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemShape : Union
ItemTypeKeyword : flared-tube-fittings
Manufacturer : PATIKIL
Material : Brass
ModelName : Steel JIC Fitting
ModelNumber : pta221015tt0236
NumberOfItems : 2
NumberOfPieces : 5
NumberOfPieces1 : 1
NumberOfPieces2 : 2
PackageLevel : unit
PartNumber : pta221015tt0236
ProductDescription : This brass flare tube fitting is widely used in pipe connections for air conditioning, hydraulic and pneumatic systems, HVAC, automotive, humidifiers, grills, and fire pit. Also, the union fitting is suitable for fuel, gas systems, and refrigeration equipment. It can be used with copper, brass, aluminum, and other hydraulic tubes that can be flared.

Specification:
Color: Brass Tone
Connector Material: Brass
Male Thread Size: 5/8 SAE Thread(Actual thread diameter is around 21.9mm)
Female Thread Size: 1/2 SAE(Actual thread diameter is around 17.5mm)
Hexagon Width: 24mm / 0.94 Inch
Total Length: 33mm / 1.30 Inch
Packing List: 2 Pcs x Brass Flare Tube Fitting, 1 Pcs x PTFE Tape

Advantage:
1. Brass material always has good corrosion resistance, is not easy to deform, and is durable to use.
2. 45 degree flare thread connection design not only provides a good sealing performance but also helps you install and remove them easier.

Instruction:
Connect one end to a threaded pipe and connect the other end to a threaded pipe. And then seal the thread connection with the PTFE tape. Good replacement for repairing the leak of the pipeline.

NOTE: Need to confirm your pipe size before ordering. 5/8 SAE Male Thread Fit for 7/8-14UNF Female Thread. 1/2 SAE Female Thread Fit for 3/4-16UNF Male Thread.
ProductSiteLaunchDate : 2023-03-16T09:35:46.144Z
Size : 5/8 SAE Male x 1/2 SAE Female
Style : Flare X Male
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 40141700