Cart 2 india

Specification
Brand : CGW Abrasives
BulletPoint : 2/1 Steel Stainless Steel
BulletPoint1 : Firm, quality Aluminum Oxide coated abrasive material
BulletPoint2 : The flaps, arranged like a fan around the shaft of the tool, provide for consistent cutting action, maximum performance and long life.
BulletPoint3 : Use on steel, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass. Excellent for working in small, difficult to reach places.
BulletPoint4 : Box of 10
BulletPoint5 : A premium-quality backing plate pad that has a 9 hole vacuum pattern, making it ideal for use with a 5" diameter 9 hole pattern hook & loop dustless sandpaper discs. This backing pad also works excellent with a standard no-hole hoop & loop sandpaper, as well as buffing and polishing pads.
BulletPoint6 : Widely used in the construction industry for cutting steel bars, steel bars, protruding bolts or anything that needs to be quickly disassembled or trimmed.
Color : Grey
CompatibleDevices : Die Grinder
ConstructionType : Coated
ExternallyAssignedProductIdentifier1 : 655332370989
ExternallyAssignedProductIdentifier2 : 0655332370989
FasteningType : default
IncludedComponents : German Technology
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
IndustryStandardIdentifier : Type 84
ItemDisplayWeight : 0.03 pounds
ItemName : 3/4X3/4X1/4 AO 60 Flap Wheel
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 15 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemTypeKeyword : abrasive-flap-wheels
Manufacturer : CGW Abrasives
Material : Aluminum Oxide
Material1 : Aluminum Oxide
Material2 : NorZon
Material3 : Material
Material4 : Material
Material5 : Material
Material6 : Material
Material7 : Material
Material8 : Material
Material9 : Material
MaximumRotationalSpeed : 12.2 rpm
ModelName : 3/4X3/4 60(A/O) 1/4SHANK
ModelNumber : 37098
NumberOfItems : 1
PackageLevel : unit
PartNumber : 37098
ProductDescription : Use Mount Correctly DO NOT OVERSPEED IMPROPER USE MAY CAUSE WHEEL BREAKAGE AND SERIOUS PERSONAL INJURY OR DEATH, ALWAYS COMPLY WITH:CSA SAFETY CODES,ANSI B71 AND OSHA REGULATIONS, ADJUST GUARD FOR MAX OPERATOR PROTECTION INSPECT WHEEL BEFORE OPERATION AND DISCARD IF DAMAGED, DO NOT EXCEED MAXIMUM RPM,DROP OR ABUSE THE WHEEL ALWAYS USE A GUARD. WEAR PERSONAL PROTECTIVE EQUIPMENT AND OBSERVE PROPER MOUNTING PROCEDURES.RUN: IN FOR ONE MINUTE BEFORE USE, DO NO POSITION BODY IN-LINE WITH WHEEL DO NO USE NEAR
ProductSiteLaunchDate : 2008-06-17T10:15:19-00:00
SupplierDeclaredDgHzRegulation : not_applicable
TeamName : Asev
UnitCount : 50