Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : USA Knifemaker Supply
BulletPoint1 : Elmax is a particle metallurgy stainless steel made by Uddeholm. It is a well balanced knife steel that offers very good corrosion resistance, edge holding and good toughness. It is a good steel to choose for almost any type of knife, including high quality hunting knives, kitchen knives, or folding knives.
BulletPoint2 : Composition of Elmax Steel Carbon 1.70% Chromium 18.00% Vanadium 3.00% Molybdenum 1.00% Silicon 0.80% Manganese 0.30%
BulletPoint3 : Heat treat information in the product description
BulletPoint4 : Hot rolled and Annealed (soft)
BulletPoint5 : Water jet cut
BulletPoint6 : .172"x1"x12"- Thickness will be slightly oversize
CareInstructions : Hand Wash Only
Color : Silver
ExternallyAssignedProductIdentifier : 7417000564013
ExternallyAssignedProductIdentifier1 : 0301155592694
ExternallyAssignedProductIdentifier2 : 301155592694
HandOrientation : Ambidextrous
IncludedComponents : Steel
ItemDisplayDimensions_Length : 19 inches
ItemDisplayDimensions_Width : 2 inches
ItemLength : 5 inches
ItemName : Elmax stainless steel by Bohler Uddeholm- .172"x1"x12"- use for knifemaking, metalworking, jewelry
ItemPackageDimensions_Height : 1.75 inches
ItemPackageDimensions_Length : 10.13 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : fixed-blade-tool-knives
Manufacturer : Bohler Uddeholm
Material : Stainless Steel
ModelName : Condor Tool & Knife CTK283923HC: Blue River Neck Knife
ModelNumber : CTK283923HC
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Elmax
ProductDescription : Heat Treatment for Elmax Wrap blade in stainless steel heat treat foil Bring to 1500°F and equalize (let it soak for 10 minutes) Bring it up to Austenitizing temp 1980° - 2010°F and hold for 30 minutes Quench in air or plate quench. A Cryo treatment in liquid nitrogen (or dry ice) before tempering will reduce retained austenite and increase hardness Temper between 350°F - 400°F twice for 2 hours each time. Cool to room temperature in between tempers. Austenitizing at 2010 F followed by a Cryo treatment and tempering at 400F should result in a hardness of 60-61 HRC
ProductSiteLaunchDate : 2024-03-29T21:02:46.364Z
RecommendedUsesForProduct : Electrical,Mechanical
Size : 1/8"
Style : Modern
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1