Cart 2 india

Specification
Brand : ELFJMZP
BulletPoint1 : Used to convert the power supply's 4Pin (large D-type) connector to a 6Pin PCI-E connector to provide additional power for discrete graphics cards. Solve the problem that the power supply lacks 6Pin graphics card power supply, avoiding graphics card performance drop or error report due to insufficient power supply. Only for graphics card power supply, not for CPU or other devices (different voltage specification).
BulletPoint2 : Input: Standard 4Pin (Molex/D-type) male connector, connects to the 4Pin connector of the power supply. Output: 6Pin PCI-E male connector, directly plugged into the graphics card power supply port. Cable: 18AWG or 22AWG copper core cable, PVC insulation, high temperature resistance 80℃, flame retardant and safe.
BulletPoint3 : A single 4Pin connector supports a maximum of about 54W (12V x 4.5A), which is needed to ensure that the power consumption of the graphics card is within a safe range. Adopt 3-wire transmission design (not missing wire) to ensure stable power supply and reduce the risk of voltage fluctuation. The outer PVC sheath is anti-oxidation and anti-bending to enhance durability.
BulletPoint4 : Cable length: about 18cm Scenario: suitable for PCI-E graphics cards that require additional 6Pin power supply, compatible with most medium and low power consumption models. Restrictions: High-power graphics cards (such as high-end game cards) are recommended to use the power supply native PCI-E power supply, this adapter cable is only a temporary or auxiliary solution.
BulletPoint5 : Before using, you need to make sure that the 4Pin connector of the power supply can provide enough power to avoid overloading. When plugging or unplugging, you need to hold the connector tightly to avoid damage caused by violent pulling. Long-term high load operation may affect the stability, it is recommended to upgrade the power supply as a priority (e.g. higher power consumption of the graphics card).
CompatibleDevices : Laptop
CompatibleDevices1 : NVIDIA
CompatibleDevices2 : AMD
CompatibleDevices3 : ASUS
CompatibleDevices4 : EVGA
CompatibleDevices5 : AMD
ConnectorGender : Male-to-Female
ConnectorType : 4 Pin Molex to 6 Pin Atx
ExternallyAssignedProductIdentifier1 : 0723508507443
ExternallyAssignedProductIdentifier2 : 723508507443
IncludedComponents : NO
ItemName : ELFJMZP 4 Pin Molex to 6 Pin Video Card GPU Power Supply Cable PCI-E Male Graphics Card Adapter(Pack of 2)
ItemPackageDimensions_Height : 0.67 inches
ItemPackageDimensions_Length : 7.8 inches
ItemPackageDimensions_Width : 4.7 inches
ItemTypeKeyword : computer-firewire-cables
Manufacturer : ELFJMZP
MaximumCurrent : 12 amps
NumberOfItems : 1
PartNumber : EP-00014
ProductDescription : This is a 4Pin to 6Pin graphics card power cable for computer power interface conversion, capable of converting a standard large 4Pin (D-type) power connector to a 6Pin PCI-E power connector,
providing stable power support for discrete graphics cards that require additional power. The adapter cable is made of 18AWG or 22AWG high-specification copper-core wire,
wrapped with flame-retardant PVC insulation, with high temperature resistance up to 80°C to ensure safe and reliable current transmission,
as well as oxidation-resistant and bend-resistant characteristics to extend its service life.
The conversion cable is mainly used to solve the problem of old power supply or low power supply lack of native 6Pin graphics card power supply interface,
to avoid the graphics card due to insufficient power supply and performance degradation or system error reporting. Its input is a standard 4Pin male connector, which can be directly connected to the Molex 4Pin output of the power supply,
while the output is a 6Pin PCI-E male connector, which is a perfect match for the power supply needs of most medium and low-power graphics cards.
It should be noted that this adapter is only suitable for powering graphics cards, not CPUs or other devices, which may be damaged if connected incorrectly due to different voltage specifications.
Since the theoretical maximum output power of a single 4Pin connector is about 54W (12V x 4.5A),
this adapter is more suitable for medium and low power consumption graphics cards. If the graphics card has high power consumption,
it is recommended to choose a power supply with native 6Pin or 8Pin power supply interface to ensure stable operation. When using it,
you should pay attention to the plugging and unplugging method to avoid damaging the interface by excessive force, and ensure that the power supply's 4Pin connector can provide enough
power to prevent the risk of overloading. This adapter cable provides a cost-effective solution for temporary or emergency power supply solutions,
especially suitable for users who are upgrading their graphics cards but are unable to replace the power supply for the time being.
ProductSiteLaunchDate : 2025-04-21T13:56:17.294Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43201400