Cart 2 india

Specification
Brand : Danfoss
BulletPoint1 : Oil burner nozzle with full cone
BulletPoint2 : Angle: 60 degrees
BulletPoint3 : Nozzle size (7bar): USgal/h 1.00
BulletPoint4 : Mass flow (10bar): 3.72 kg/h
BulletPoint5 : Maximum 100 psi pressure
Color : 1 " NPSH/NPT
Department : Hose Nozzles
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 5702425017223
ExternallyAssignedProductIdentifier2 : 05702425017223
IncludedComponents : Brass Fire Equipment
ItemDisplayWeight : 0.27 pounds
ItemName : Danfoss Oil Fired Boiler Burner Nozzle 1.00 x 60 S USgal/h ° Degree Spray Pattern 1.0 Heating Jet 3.
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 4.4 centimeters
ItemPackageDimensions_Width : 5.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-hose-fire-hose-nozzles
Manufacturer : Danfoss
Material : Brass
Material1 : Plastic
Material2 : Rubber
MaximumOperatingPressure : 100 pounds_per_square_inch
ModelName : SBN2
ModelNumber : 030F6920
NumberOfItems : 1
NumberOfPorts : 1
PackageLevel : unit
PartNumber : 030F6920
ProductDescription : Product Feature
Material - Brass
Size - 1inches
Threads – NPSH/NPT
Approximate Distance - 60 feet
Maximum operating pressure - 100psi
Approximate Gallons Per Minute (GPM) – 75
Positions - Fog, straight stream and off

NOTE: This nozzle will only connect to a 1" NPSH/NPT hose, not for NST/NH thread
◆NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.
But NST or NH is more common these days. NH = NST.
◆NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket
in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT
thread into a female metal or pvc pipe.
◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered
thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the
opposite tapers force thread friction and makes the seal without the use of a gasket.

ProductSiteLaunchDate : 2014-12-26T06:44:55.036Z
Size : 2" NPSH
SpecificationMet : UL
StreetDate : 2017-11-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27000000
ValveType : Gate Valve