Cart 2 india

Specification
Brand : Boltigen
BulletPoint1 : 【Size】Double male fire hose adapter with 2" male National Pipe Taper (NPT) threaded connection on one end and a 2-1/2" male National Standard Thread (NST) or National Hose (NH) connection on the other.
BulletPoint2 : 【Material】Brass fire hydrant Hose adapters are made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters.
BulletPoint3 : 【Easy Operation】Brass fire hydrant hose connector with double male thread and hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench These fire hose fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters.
BulletPoint4 : 【Application】Brass fire hydrant adapter fittings used for connecting fire hose, pvc pipe and other low pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military and civil protection.
BulletPoint5 : 【Quality Warranty】We did 100% inspection before these brass fire hydrant hose adapters leave our factory, if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution.
Color : Brass
ConnectorType : Nipple
CustomerPackageType : Standard Packaging
ExteriorFinish : Brass
ExteriorFinish1 : malleable iron
ExteriorFinish2 : Black
ExternallyAssignedProductIdentifier : 00850035446645
ExternallyAssignedProductIdentifier1 : 791206045369
ExternallyAssignedProductIdentifier2 : 0791206045369
IncludedComponents : Each set includes two caps and 4 eyelets with nuts for 21/2” swivels
ItemDisplayDimensions_Length : 100 centimeters
ItemName : Fire Hydrant Hex Nipple, 2" NPT x 2-1/2" NST (NH) Male Fire Hydrant Hose Adapter Fitting Double Male Brass Fire Hydrant Connector
ItemPackageDimensions_Height : 10.4902 centimeters
ItemPackageDimensions_Length : 6.4008 centimeters
ItemPackageDimensions_Width : 9.2964 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : fire-hose-fittings
Manufacturer : Boltigen
Material : Brass
Material1 : Iron
Material2 : Polyvinyl Chloride
Material3 : Metal
ModelName : Metal Magery FDC Caps
ModelNumber : TA283
NumberOfItems : 1
NumberOfPieces : 2
PartNumber : B36H1P1N
ProductDescription : Fire Hydrant Hose Adapter, 2" NPT x 2-1/2" NST (NH) Male Hex Nipple Fire Hose Fitting Double Male Brass Fire Hydrant Adapter
1.Size: 2"NPT Male x 2-1/2"NH(NST) male
2.Connection: Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes
3.Durable: All metal construction, made from high-quality brass, has strong corrosion resistance and ductility at high temperatures, durable to use
4.NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST
GHT: Threads are garden hose thread (GHT), which is 3/4″ diameter parallel (non-tapered) thread with a pitch of 11.5 threads per inch (TPI), which require gaskets or O-rings to seal when connected
NPT: Threads are National Pipe Thread and is an American standard thread, NPT has tapered threads, so GHT and NPT threads are not compatible with each other
Please noted:
1.The dimensions marked in the picture are measured manually and may be slightly different from the actual size.
2.Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter.

ProductDescription1 : These Metal Magery Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary.
ProductDescription2 : Installation: Remove the caps from their packaging. Hold the breakable cap to the opening of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned, insert the threaded end of one eyelet through the hole in the tab of the cap then slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the included 1/4-20 finished hexnut on to the threaded end of the eyelet until snug. Caution: Do not overtighten. The tabs of the break caps are designed to break with minimal force.
ProductSiteLaunchDate : 2022-06-16T06:57:53.333Z
Size : 2" NPT Male x 2-1/2" NST Male
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700