Cart 2 india

Specification
Brand : Dixon
BulletPoint1 : Hydrant adapter with pin lug
BulletPoint2 : Made of brass
BulletPoint3 : Size: 3-1/8" length
BulletPoint4 : Material: 6061-T6 Aluminum
BulletPoint5 : Finish: Hard Coat Anodized
Color : Brass
ConnectorType : Adapter
Department : Unisex Adult
ExteriorFinish : Brass
ExteriorFinish1 : Aluminum
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier : 7464647127064
ExternallyAssignedProductIdentifier1 : 765756510622
ExternallyAssignedProductIdentifier2 : 0765756510622
IncludedComponents : Fire Hydrant Adapter
ItemDisplayWeight : 4.71 pounds
ItemName : Dixon Valve HA4025F Brass Fire Equipment, Hydrant Adapter with Pin Lug, 4" NST (NH) Female x 2-1/2" NST (NH) Male
ItemPackageDimensions_Height : 7.366 centimeters
ItemPackageDimensions_Length : 16.256 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemShape : Adapter;pin Lug
ItemTypeKeyword : fire-hose-fittings
Manufacturer : Dixon Valve & Coupling
Material : Brass
Material1 : Aluminum
Material2 : Brass
ModelName : WD30041
ModelNumber : HA4025F
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : HA4025F
ProductDescription :

• Material: 6061-T6 Aluminum
• Finish: Hard Coat Anodized
• Complies With NFPA 1963 (Corrosion Resistance)
• 99.95% Lead Free

The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free.

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

ProductSiteLaunchDate : 2012-03-08T23:38:32.439Z
Size : 4" NST (NH) Female x 2-1/2" NST (NH) Male
Style : Threaded
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 40141700