Cart 2 india

Specification
Brand : Generic
BulletPoint : 2.5" Cap Chain aluminum
Color : Gray
IncludedComponents : Cap Chain
ItemName : C-25 2.5" NH Cap With Chain
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 7 inches
ItemTypeKeyword : fire-hose-fittings
Manufacturer : Redhead
Material : Aluminum
ModelName : Cap
ModelNumber : C-25 2.5" NH cap With Chain
NumberOfItems : 1
ProductDescription : Material: 6061-T6 Aluminum Finish: Hard Coat Anodized Complies With NFPA 1963 (Corrosion Resistance) 99.95% Lead Free The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free. Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST. NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe. NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket
ProductSiteLaunchDate : 2023-09-27T22:02:52.405Z
Size : 2.5 Inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000