Cart 2 india

Specification
Brand : FireHoseDirect
BulletPoint1 : Side 1 - Male 1 inch NPSH
BulletPoint2 : Side 1 Will Only Connect to a Female 1 inch NPSH
BulletPoint3 : Side 2 - Male 1 inch NPT
BulletPoint4 : Side 2 Will Only Connect to a Female 1 inch NPT or NPSH
BulletPoint5 : Material - Cast Brass
Color : Brass
ConnectorType : Adapter
CustomerPackageType : Standard Packaging
ExteriorFinish : Brass
ExteriorFinish1 : malleable iron
ExteriorFinish2 : Black
ExternallyAssignedProductIdentifier : 00850035446645
ExternallyAssignedProductIdentifier1 : 791206045369
ExternallyAssignedProductIdentifier2 : 0791206045369
IncludedComponents : Each set includes two caps and 4 eyelets with nuts for 21/2” swivels
ItemDisplayDimensions_Length : 100 centimeters
ItemName : Brass Fire Hose Adapter Male x Male - 1" NPSH to 1" NPT
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : fire-hose-fittings
Manufacturer : FireHoseDirect
Material : Brass
Material1 : Iron
Material2 : Polyvinyl Chloride
Material3 : Metal
ModelName : Metal Magery FDC Caps
ModelNumber : TA283
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : B36H1P1N
ProductDescription :

Male to male adapters are used to bridge two female hose, pipe or valve fittings.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

1" Male Adapter

• Inside diameter of a male adapter - 1 inch
• Outside diameter of a male NH / NST adapter - 1.375 inches (8 Threads per inch)
• Outside diameter a male NPSH or NPT adapter - 1.295 inches (11.5 Threads per inch)

Our company is located in North Carolina and we are firefighter owned and operated since 2011.

ProductDescription1 : These Metal Magery Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary.
ProductDescription2 : Installation: Remove the caps from their packaging. Hold the breakable cap to the opening of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned, insert the threaded end of one eyelet through the hole in the tab of the cap then slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the included 1/4-20 finished hexnut on to the threaded end of the eyelet until snug. Caution: Do not overtighten. The tabs of the break caps are designed to break with minimal force.
ProductSiteLaunchDate : 2021-01-13T03:31:23.278Z
Size : 1" NPSH x 1" NPT
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700