Cart 2 india

Specification
Brand : FireHoseDirect
BulletPoint1 : Female Side - 1 1/2 inch NH
BulletPoint2 : The Female Will Only Connect To A Male 1 1/2 inch NH
BulletPoint3 : Male Side - 1 1/2 inch NPT
BulletPoint4 : The Male Will Only Connect To A Female 1 1/2 inch NPT or NPSH
BulletPoint5 : Material - Brass
Color : Brass
ConnectorType : Coupling
CustomerPackageType : Standard Packaging
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 00850035446645
ExternallyAssignedProductIdentifier1 : 765756510028
ExternallyAssignedProductIdentifier2 : 0765756510028
IncludedComponents : Each set includes two caps and 4 eyelets with nuts for 21/2” swivels
ItemDisplayDimensions_Length : 100 centimeters
ItemName : Brass 1 1/2" Female NH to 1 1/2" Male NPT Fire Hose Adapter
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 13.97 centimeters
ItemTypeKeyword : fire-hose-fittings
Manufacturer : FireHoseDirect
Material : Aluminum
Material1 : Iron
Material2 : Polyvinyl Chloride
Material3 : Metal
ModelName : Metal Magery FDC Caps
ModelNumber : MMFDCCaps
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : B37H1515N
ProductDescription :

Female to male adapters are used to bridge male to female hoses, pipes or valve fittings.

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

GHT:Garden Hose Thread, just like NST and NPSH, seals with a gasket in the female coupling. A typical garden hose may be 5/8" or 3/4" inside diameter but the fitting on the ends will be GHT. GHT is not compatible with NPT. For example, 3/4" GHT is not the same as 3/4" NPT.

Our company is located in North Carolina and we are firefighter owned and operated since 2011.

ProductDescription1 : These Metal Magery Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary.
ProductDescription2 : Installation: Remove the caps from their packaging. Hold the breakable cap to the opening of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned, insert the threaded end of one eyelet through the hole in the tab of the cap then slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the included 1/4-20 finished hexnut on to the threaded end of the eyelet until snug. Caution: Do not overtighten. The tabs of the break caps are designed to break with minimal force.
ProductSiteLaunchDate : 2019-02-09T06:50:48.147Z
Size : 1 1/2" NH x 1 1/2" NPT
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700