Specification Brand : Banjo Corp BulletPoint1 : Buttress for connecting threaded pipes with different ends BulletPoint2 : Female buttress threads on one end and male NPT threads on the other for connecting pipes with different ends BulletPoint3 : Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance BulletPoint4 : Side Outlet Tee BulletPoint5 : 150 Pound Rating Color : Black ConnectorType : Coupling CustomerPackageType : Standard Packaging ExteriorFinish : Alloy Steel ExteriorFinish1 : malleable iron ExteriorFinish2 : Black ExternallyAssignedProductIdentifier : 00850035446645 ExternallyAssignedProductIdentifier1 : 791206045369 ExternallyAssignedProductIdentifier2 : 0791206045369 IncludedComponents : Each set includes two caps and 4 eyelets with nuts for 21/2” swivels ItemDisplayDimensions_Length : 100 centimeters ItemName : Banjo TA283 Polypropylene Tank Fitting, 2" Buttress x 2" Male NPT Threads with Gasket ItemPackageDimensions_Height : 7.62 centimeters ItemPackageDimensions_Length : 10.16 centimeters ItemPackageDimensions_Width : 7.62 centimeters ItemPackageQuantity : 1 ItemShape : Round ItemTypeKeyword : fire-hose-fittings Manufacturer : Banjo Corporation Material : Polypropylene Material1 : Iron Material2 : Polyvinyl Chloride Material3 : Metal ModelName : Metal Magery FDC Caps ModelNumber : TA283 NumberOfItems : 1 NumberOfPieces : 1 PartNumber : TA283 ProductDescription : Description: Black fittings (black malleable iron fittings) are used to make connections to black iron pipe. Transport natural and propane gas from the street or a tank to the home. A popular choice in fire sprinkler systems due to its high heat resistance and for water supply lines due to its resistance to water damage.
Features: Side Outlet Tee Black Coating Malleable Iron Threaded 150 Pound Rating
Package Included: 1 x 3/4" Side Outlet Tee
ProductDescription1 : These Metal Magery Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary. ProductDescription2 : Installation: Remove the caps from their packaging. Hold the breakable cap to the opening of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned, insert the threaded end of one eyelet through the hole in the tab of the cap then slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the included 1/4-20 finished hexnut on to the threaded end of the eyelet until snug. Caution: Do not overtighten. The tabs of the break caps are designed to break with minimal force. ProductSiteLaunchDate : 2017-09-27T02:35:57.107Z Size : 1 Pack SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 40183100