Aluminum 2" Female NPT to 1 1/2" Male NH Fire Hose Adapter

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 14000/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : FireHoseDirect
BulletPoint1 : Made in the USA
BulletPoint2 : Material - 6061-T6 Aluminum
BulletPoint3 : Female Side - 2 inch NPT
BulletPoint4 : Male Side - 1 1/2 inch NH / NST
BulletPoint5 : Finish - Hard Coat Anodized
Color : Brass
ConnectorType : Coupling
CustomerPackageType : Standard Packaging
ExteriorFinish : Aluminum
ExteriorFinish1 : malleable iron
ExteriorFinish2 : Black
ExternallyAssignedProductIdentifier : 00850035446645
ExternallyAssignedProductIdentifier1 : 717410534635
ExternallyAssignedProductIdentifier2 : 0717410534635
IncludedComponents : Each set includes two caps and 4 eyelets with nuts for 21/2” swivels
ItemDisplayDimensions_Length : 100 centimeters
ItemName : Aluminum 2" Female NPT to 1 1/2" Male NH Fire Hose Adapter
ItemPackageDimensions_Height : 14.224 centimeters
ItemPackageDimensions_Length : 4.318 centimeters
ItemPackageDimensions_Width : 13.97 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : fire-hose-fittings
Manufacturer : FireHoseDirect
Material : Aluminum
Material1 : Iron
Material2 : Polyvinyl Chloride
Material3 : Metal
ModelName : Metal Magery FDC Caps
ModelNumber : TA283
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 37R2N15
ProductDescription :
  • The Female Will Only Connect To A Male 2 inch NPT
  • The Male Will Only Connect To A Female 1 1/2 inch NH / NST
  • Complies With NFPA 1963 (Corrosion Resistance)
  • 99.95% Lead Free

The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free.

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.


ProductDescription1 : These Metal Magery Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary.
ProductDescription2 : Installation: Remove the caps from their packaging. Hold the breakable cap to the opening of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned, insert the threaded end of one eyelet through the hole in the tab of the cap then slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the included 1/4-20 finished hexnut on to the threaded end of the eyelet until snug. Caution: Do not overtighten. The tabs of the break caps are designed to break with minimal force.
ProductSiteLaunchDate : 2018-12-12T06:15:06.223Z
Size : 2" NPT x 1 1/2" NH
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.