Cart 2 india

Specification
Brand : FireHoseDirect
BulletPoint1 : Made in the USA
BulletPoint2 : Swivel Female Side - 2.5 inch NH / NST
BulletPoint3 : The Female Will Only Connect To A Male 2.5 NH / NST
BulletPoint4 : Male Side - 2.0 inch NPT
BulletPoint5 : The Male Will Only Connect To A Female 2.0 NPT or NPSH
Color : Red
ConnectorType : Coupling
CustomerPackageType : Standard Packaging
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier1 : 795973600318
ExternallyAssignedProductIdentifier2 : 0795973600318
ItemDisplayWeight : 1.3 pounds
ItemLength : 26 inches
ItemName : Aluminum 2 1/2" Swivel Female NH to 2" Male NPT Fire Hose Adapter
ItemPackageDimensions_Height : 10.922 centimeters
ItemPackageDimensions_Length : 9.398 centimeters
ItemPackageDimensions_Width : 9.398 centimeters
ItemPackageQuantity : 1
ItemShape : hex nipple
ItemTypeKeyword : fire-hose-fittings
Manufacturer : FireHoseDirect
Material : Aluminum
ModelName : QS30045
ModelNumber : QS30045
NumberOfBoxes : 1
NumberOfItems : 4
NumberOfPieces : 4
PartNumber : 54R252N
ProductDescription :

• Material: 6061-T6 Aluminum
• Finish: Hard Coat Anodized
• Complies With NFPA 1963 (Corrosion Resistance)
• 99.95% Lead Free

The Safe Water Drinking Act section 1417 requires "Lead Free" products to be a minimum of 99.75% lead free.

Aluminum adapters are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963.

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST.

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

ProductSiteLaunchDate : 2018-08-31T13:13:54.298Z
Size : 2" NPT Female x 2-1/2" NST (NH) Male
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 40141700