Cart 2 india

Specification
Brand : MewMore
BulletPoint1 : Superior Sealing: The MewMore FHW10 10"x2.5" whole house water filter housing with Pressure relief button, 3/4 inch inlet, thread port and Double O-ring, making sure no water leaks after long-term use. Note: Avoid excessive use of Teflon tape during installation.
BulletPoint2 : Quality & Safety: The filter housing is made of high-flow reinforced polypropylene, which is resistant to corrosion and water pressure. Food Grade Material, Lead-Free, and BPA-Free. Non-toxic, odorless. Fits NSF standard, providing a healthy, safe water-filtering experience.
BulletPoint3 : Easy to Install: The whole house water filter housing comes with all tools required for installation, including 1 heavy-duty steel mounting bracket, 1 wrench and 4 screws. Pressure relief button on cap for easy cartridge changes.
BulletPoint4 : DIY Inline Water Filter Housing: There is a possibility to obtain several completes to be mounted parallelly (two or three stages) for a better filtration quality. Per your water quality, you can choose the sediment filter, carbon water filter, etc for the DIY installation of the whole housing water filtration system. (Filter cartridges are sold separately)
BulletPoint5 : Compatible Cartridges: The MewMore FHW10 water filter housing blue fits for all universal standard 2.5” x 10” filters cartridges.
BulletPoint6 : O-Ring Please search on Amazon: B0DPLCC2LR
IncludedComponents : Heavy Duty Steel Mounting Bracket, Wrench, Screws, Quick Guide
ItemName : MewMore FHW10 10"x2.5" Whole House Water Filter Housing, Fit Sediment etc Filters for Well and City Water, Pre-Filtration System for Home, 3/4" NPT Port, Pressure Release
ItemPackageDimensions_Height : 34.4932 centimeters
ItemPackageDimensions_Length : 13.3096 centimeters
ItemPackageDimensions_Width : 16.1036 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-process-filter-housings
Manufacturer : MewMore
ModelNumber : FHW10
NumberOfItems : 1
PartNumber : M - 1025 - housing - White
ProductDescription : MewMore FHW10 10" x 2.5"
Whole House Water Filter Housing

DIY Whole House Filtration System
Provides clean water throughout the entire house

Specification:
Inlet / Outlet: 3/4" NPT Port
Applicable Water Quality: Municipal Tap Water and Well Water
Housing Material: Food Grade Polypropylene
Compatibly Filter Dimensions: 10" x 2.5"
Burst Pressure: 429 Psi (30 Bar)
Applicable Water Temperature: 5 - 45 ℃ (40-110 ℉)
Pressure Relief Button: Include
PH Range: 6 - 11

Fits All 10" x 2.5" Cartridges (Sold Separately):
Sediment Filter
Carbon Filter
String Filter
Pleated Filter

Package Included:
1 * 10" x 2.5" Water Filter Housing
1 * Heavy Duty Steel Mounting Bracket
1 * Wrench
4 * Screws
1 * Quick Guide

Installation precautions:
Do not place the water purifier in direct sunlight or near the gas stove.
After the installation is complete, please check if all the joints are tight to avoid loss of water leakage.

Using precautions:
The normal use water temperature of the water purifier is 5 - 45 ℃ (40-110 ℉).
The hot water can not be filtered, which will cause the water purifier to be damaged.
In winter, it should be kept warm to prevent freezing.

Cleaning precautions:
When cleaning the water purifier, it is suitable to be cleaned with flexible detergent, avoiding the use of strong volatile solvents such as gasoline.

How to replace filter:
After using or replacing the filter element for the first time, let the tap water for 5-10 minutes until the water flow is clear and the filter element is clean. (The filter is not included)
ProductSiteLaunchDate : 2025-02-23T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40141700