Cart 2 india

Specification
Brand : ESSMO
BulletPoint : Works with virtually any craft cutter, including: Silhouette Cameo 3, Cricut Explore Air 2, Cricut Maker, Brother ScanNCut, Roland, Graphtec, and more.!
BulletPoint1 : Specifications: PU composition Pressure sensitive backing Matte finish 757 Microns / 29.5 Mils 45°/60° blade Can be layered
BulletPoint2 : Applies to: 100% cotton 100% polyester Poly/cotton blends Leather
BulletPoint3 : Heat Application: Time: 10-15 Seconds Temperature: 305° F / 150° C Pressure:Medium Peel: HOT or COLD
BulletPoint4 : Care Instructions: Machine wash WARM or COLD / mild detergent Dry at normal setting No chlorine bleach Wait 24 hours before first wash
Color : Yellow
ExternallyAssignedProductIdentifier1 : 688931843370
ExternallyAssignedProductIdentifier2 : 0688931843370
FabricType : Vinyl
FabricType1 : PU
FabricType2 : Vinyl
ItemName : JD-ESSMO Yellow Flock Heat Transfer Vinyl HTV Sheet T-Shirt 20" Wide Iron On Heat Press 20"x12"
ItemPackageDimensions_Height : 33.782 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 7.874 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sewing-heat-transfer-film
Manufacturer : JD-ESSMO
Material : Vinyl
Material1 : leather
Material2 : Cotton
Material3 : Polyester
ModelNumber : DF14
NumberOfPieces : 1
PartNumber : ESSMO-YELLOW-FLOCK-DF14-20"X12"
ProductDescription :

Material Specification:

• PU Composition
• Thickness:757 Microns / 29.5 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Flock Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305F/150C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

ProductSiteLaunchDate : 2019-02-19T01:10:50.995Z
Size : 20"x12" (1.66FT x 1FT)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44102000