Cart 2 india

Specification
Brand : ESSMO
BulletPoint1 : Specifications: PU composition Pressure sensitive backing Matte finish 230 Microns / 9.8 Mils 45°/60° blade Can be layered
BulletPoint2 : Applies to: 100% cotton 100% polyester Poly/cotton blends Leather
BulletPoint3 : Heat Application: Time: 10-15 Seconds Temperature: 305° F / 150° C Pressure:Medium Peel: HOT or COLD
BulletPoint4 : Care Instructions: Machine wash WARM or COLD / mild detergent Dry at normal setting No chlorine bleach Wait 24 hours before first wash
BulletPoint5 : Ideal DIY: Whether you're a DIY enthusiast or looking for a unique handicraft for someone special, Amavinyl heat press vinyl is the good choice. It allows you to personalize shirts and create custom designs that are sure to impress. Give the handicraft of creativity and endless possibilities
BulletPoint6 : Please have a little test of cutting & ironing before use
Color : Black
ExternallyAssignedProductIdentifier1 : 0889658468246
ExternallyAssignedProductIdentifier2 : 889658468246
FabricType : Heat Transfer Vinyl
ItemName : ESSMO Black Glitter Heat Transfer Vinyl HTV Sheet T-Shirt 20" Wide Iron On Heat Press 20"x96"
ItemPackageDimensions_Height : 32.29 centimeters
ItemPackageDimensions_Length : 6.3 centimeters
ItemPackageDimensions_Width : 17.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sewing-heat-transfer-film
Manufacturer : ESSMO
Material : Vinyl
Material1 : leather
Material2 : Cotton
Material3 : Polyester
ModelName : HR-A20
ModelNumber : DG01
NumberOfItems : 3
NumberOfPieces : 3
PartNumber : ESSMO-BLACK-GLITTER-DG01-20"X96"
ProductDescription :

Material Specification:

• PU Composition
• Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Glitter Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305F/150C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

ProductSiteLaunchDate : 2020-04-16T23:47:02.085Z
Size : 20"x96" (1.66FT x 8FT)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44102000
WarrantyDescription : 12 Months