Cart 2 india

Specification
Brand : Owens Corning
BulletPoint1 : Floor-Ceiling This product if perfect for insulation between floors-ceiling of a house. The Friction Fit nature of this insulation will cause it to stay in place upon installation. If further support is need try using insulation rods. Attic This product is recommended for an attic application. Place this in between your trusses. For unfaced insulation make sure there is 2 inches of properly vented air space to prevent moisture in the insulation.
BulletPoint2 : In the Bags There are 8 Batts per Bag for a Total of 63.33 SQFT per Bag. Bulk listing of 8 Bags or Two Bundles of 4 Making the Total Square Footage for this Product 506.64 sqft.
BulletPoint3 : Contains no Paper Backing, Kraft Facing, on Material. This Product Cannot be Used for Exterior Walls, but Works well for Interior Walls, Floors, Ceiling. Even Attic spaces with 2 or More Inches of Air Space with Proper Ventaltion.Can be used for Soundproofing
BulletPoint4 : This Product has a R-38 R-value. The Dimensions are R-38 x 23HD x 48 by 10.25 in Thick or Deep Making it Ideal for 23HD x 48 Construction.
BulletPoint5 : Requires Coordination on Delivery. A Non-Encypted Phone Number will be Needed. Please be Ready to Provide this with 24 Hours of Purchasing via a Phone Call or Amazon Messaging.
ExternallyAssignedProductIdentifier1 : 0746175488082
ExternallyAssignedProductIdentifier2 : 746175488082
ItemName : Owens Corning 507 SQFT 8 Bags of R 38 Unfaced 23 by 48 High Density Fiberglass Fits 2X10 Floor-Ceiling, attic
ItemPackageQuantity : 8
ItemShape : Square
ItemTypeKeyword : fiberglass-raw-materials
Manufacturer : Owens Corning
Material : Fiberglass
NumberOfItems : 48
PartNumber : OCR38X23HDX48UF8Temp
ProductDescription : Description
JM Formaldehyde-free thermal and acoustical insulation is made of long, resilient glass fibers bonded with a thermosetting resin. A wide range of thermal resistance R-values is available to provide thermal control for both vertical and horizontal applications. JM insulation is available unfaced or with a variety of facings, including kraft or foil vapor retarder.

Features
JM Formaldehyde-free thermal and acoustical insulation can be used in a wide variety of wood frame, engineered wood and steel frame construction applications, including:
New Construction: residential homes and commercial buildings interior and exterior walls, floors and ceilings for thermal and sound control, as well as basement wall insulation.
Retrofit: adding insulation to attics, crawl spaces and above suspended ceilings.Thermally Efficient: provides effective resistance to heat transfer with R-values up to R-49 (RSI-8.6).
Sound Control: reduces transmission of sound through exterior and interior walls and floor or ceiling assemblies.Superior Performance: bonded glass fibers are dimensionally stable and will not slump within the wall cavity, settle or break down during normal applications


Environmental and Sustainability
Formaldehyde-free: will not off-gas formaldehyde in the indoor environmentFire Resistant and Noncombustible: se.

Design Considerations
Kraft and standard foil facings on this product will burn and must not be left exposed. It must be covered with gypsum board or another approved interior finish. Where an exposed application is required, use FSK-25 flame-resistant faced insulation. In colder climate areas, vapor retarders (whether attached to the insulation or applied separately) are often placed toward the heated or conditioned side of the wall. This is done to reduce water vapor penetration into the wall from the building interior. Check your local building codes for vapor r
ProductSiteLaunchDate : 2019-10-28T17:21:25.768Z
Size : 19 by 48
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 30000000