Cart 2 india

Specification
Brand : Knauf
BulletPoint : Color: 100x250x1mm
BulletPoint1 : $20 off if you pick up in one of our 150 warehouses throughout the US
BulletPoint2 : Two bundles of 4 for a total of 8 bags for at total of 704 square footage.
BulletPoint3 : Unfaced insulation. No moisture barrier.
BulletPoint4 : R-30 type, 24W x 48L x 10 in. thick
BulletPoint5 : Package Includes:1pcs 500×500mm 3K Plain Glossy Twill Glossy Plain Matte Twill Matte Carbon Plate Panel Sheets.
Color : 100x250x1mm
ExternallyAssignedProductIdentifier : 7384786434505
ExternallyAssignedProductIdentifier1 : 0722589408526
ExternallyAssignedProductIdentifier2 : 722589408526
ItemName : Knauf 704 SQFT 8 Bags of R 30 Unfaced 24 by 48 Fiberglass Batt Fits 2X10 Floor-Ceiling, attic
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 11
ItemShape : Square
ItemTypeKeyword : fiberglass-raw-materials
Manufacturer : Knauf
ManufacturerMinimumAge : 144
Material : Fiberglass
ModelNumber : EDFMGH
NumberOfItems : 88
PartNumber : KNR30X24X48UF8
ProductDescription : Description
EcoBatt batt insulation is a cost-effective thermal and acoustical barrier for energy-efficient construction. Ecobatt insulation products can be used in new and retrofit wood and metal frame applications in residential, commercial and manufactured housing structures. High Density (HD) batts are available where optimal thermal performance is required and space is limited. StapleFree batt insulation is flangeless kraft-faced batts that friction fit between 16" on center wood studs, eliminating the need to staple.

Features

ACOUSTICAL PERFORMANCE EcoBatt insulation provides excellent acoustical properties and will reduce sound transmission when properly installed in partition walls and acoustical ceiling and floor systems. Knauf acoustical/thermal insulation can improve STC ratings in wood stud construction by 3 to 5 points and metal stud construction by 8 to 10 points depending upon the complexity of the wall configurations, R-values and layers of insulation.
FIBERGLASS AND MOLD Fiberglass insulation will not sustain mold growth. However, mold can grow on almost any material when it becomes wet and contaminated. Carefully inspect any insulation that has been exposed to water. If it shows any sign of mold, it must be discarded. If the material is wet, but shows no evidence of mold, it should be dried rapidly and thoroughly. If it shows signs of facing degradation from wetting, it should be replaced.

Environmental and Sustainability
ProductSiteLaunchDate : 2019-06-20T07:00:00.000Z
Size : 24 by 48
TargetAudienceKeyword : Unisex Adult
UnitCount : 1
UnspscCode : 30000000