Cart 2 india

Specification
Brand : Johns Manville
BulletPoint1 : Exterior Walls This product was made for exterior walls. The Kraft Faced paper backing provides a moisture barrier to keep your insulation from holding moisture when a dew point occurs. Make sure when installing to place the facing towards the warmest side, the side where all your heating and cooling will be to prevent trapping moisture inside your insulation.
BulletPoint2 : In the Bags There are 9 Batts per Bag for a Total of 133.68 SQFT per Bag. Bulk listing of 10 Bags or Two Bundles of 5 Making the Total Square Footage for this Product 1336.8 sqft.
BulletPoint3 : Kraft Facing is a Paper Backing on Insulation. This Backing Provides a Moisure Barrier/Retardent, Required in Exterior Walls. Faced Materials can be Used in Any Application for Exterior Walls, Interior Walls, Ceiling, Floors, Cathedral Ceilings, and Attic
BulletPoint4 : This Product has a R-19 R-value. The Dimensions are R-19 x 23 x 93 by 6.25 in Thick or Deep Making it Ideal for 23 x 93 Construction.
BulletPoint5 : Requires Coordination on Delivery. A Non-Encypted Phone Number will be Needed. Please be Ready to Provide this with 24 Hours of Purchasing via a Phone Call or Amazon Messaging.
Color : White
ExternallyAssignedProductIdentifier1 : 746175486347
ExternallyAssignedProductIdentifier2 : 0746175486347
ItemName : Johns Manville 1337 SQFT 10 Bags of R 19 Kraft Faced 23 by 93 Fiberglass Batts Fits 2X6 Exterior Walls
ItemPackageDimensions_Height : 4 feet
ItemPackageDimensions_Length : 4 feet
ItemPackageDimensions_Width : 23 feet
ItemPackageQuantity : 9
ItemShape : Rectangular
ItemTypeKeyword : fiberglass-raw-materials
Manufacturer : Johns Manville
Material : Fiberglass
NumberOfItems : 90
PartNumber : JMR19X23X93F10Temp
ProductDescription : Description
JM Formaldehyde-free thermal and acoustical insulation is made of long, resilient glass fibers bonded with a thermosetting resin. A wide range of thermal resistance R-values is available to provide thermal control for both vertical and horizontal applications. JM insulation is available unfaced or with a variety of facings, including kraft or foil vapor retarder.

Features
JM Formaldehyde-free thermal and acoustical insulation can be used in a wide variety of wood frame, engineered wood and steel frame construction applications, including:
New Construction: residential homes and commercial buildings interior and exterior walls, floors and ceilings for thermal and sound control, as well as basement wall insulation.
Retrofit: adding insulation to attics, crawl spaces and above suspended ceilings.Thermally Efficient: provides effective resistance to heat transfer with R-values up to R-49 (RSI-8.6).
Sound Control: reduces transmission of sound through exterior and interior walls and floor or ceiling assemblies.Superior Performance: bonded glass fibers are dimensionally stable and will not slump within the wall cavity, settle or break down during normal applications


Environmental and Sustainability
Formaldehyde-free: will not off-gas formaldehyde in the indoor environmentFire Resistant and Noncombustible: se.

Design Considerations
Kraft and standard foil facings on this product will burn and must not be left exposed. It must be covered with gypsum board or another approved interior finish. Where an exposed application is required, use FSK-25 flame-resistant faced insulation. In colder climate areas, vapor retarders (whether attached to the insulation or applied separately) are often placed toward the heated or conditioned side of the wall. This is done to reduce water vapor penetration into the wall from the building interior. Check your local building codes.
ProductSiteLaunchDate : 2019-11-01T07:00:00.000Z
Size : Medium
Style : Batts
UnspscCode : 30000000