Cart 2 india

Specification
Brand : gernie
BulletPoint1 : Easy To Install: 3pcs connecting line are included in the set, making it much simpler to install.
BulletPoint2 : Module Design: Our attenuator modules are made of materials, , and have good shock proof, anti graupel, and anti properties to ensure the life and stability of the product.
BulletPoint3 : Efficient Work: Low insertion loss will reduce loss to ensures a clearer reception.
BulletPoint4 : Flexible Usage: The attenuator module supports both parallel port and serial port mode functions.
BulletPoint5 : Gain Attenuation Range: Attenuator module 0 to 31.75DB programmable gain attenuation range, and 0.25DB step for control, power supply voltage is 5V
ExternallyAssignedProductIdentifier : 7903686680999
ExternallyAssignedProductIdentifier1 : 0732848331595
ExternallyAssignedProductIdentifier2 : 732848331595
InputVoltage : 5 volts
ItemName : gernie Rf Attenuator Module Pe4302 High Linearity Rf Fixed Attenuator Block Stepper Excellent Linearity Digital Distribu Good Linearity Rf Step Attenuator, gerniete6c5iwxyb
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : fiber-optic-attenuators
Manufacturer : gernie
Material : metal
ModelName : ZIZEV7r3obyxkzg
ModelNumber : gerniete6c5iwxyb
NumberOfItems : 1
PartNumber : gerniete6c5iwxyb
ProductDescription : 1. The PE4302 is a high linearity, 6‑bit digital RF step attenuator with DSA ranging from 0.5 dB steps to 31.5 dB.2. The frequency range is attenuated from DC‑4000MHz. This 50 ohm RF DSA provides parallel and serial CMOS control interfaces that operate on a single 3 volt supply3. Maintain high attenuation accuracy for frequency and temperature.4. It also has a unique control interface that allows the user to select the initial attenuation state at power up.5. It has a shielded case and an anti‑reverse protection diode, reliable in use.Spec:Condition: 100% Brand NewItem Type: RF Attenuator ModuleMaterial: PlasticProduct Application:The PE4302 is a high linearity, 6-bit digital RF step attenuator with DSA ranging from 0.5 dB steps to 31.5 dB. The frequency range is attenuated from DC-4000MHz. This 50 ohm RF DSA provides parallel and serial CMOS control interfaces that operate on a single 3 volt supply and maintain high attenuation accuracy for frequency and temperature. It also has a unique control interface that allows the user to select the initial attenuation state at power up. It has a shielded case and an anti-reverse protection diode.Technical Indicators1. The supply voltage: 5V DC (typical current value 5mA)2. Programmable gain attenuation range: 0 to 31.5DB Step 0.5DB Input and output impedance: 50 ohms3. The module supports parallel port and serial port mode and boot status selection function4. Bandwidth: 1MHz to 4GHz (the attenuation value is different at different frequencies, please refer to the S21 curve indicator for details)5. With metal shell shieldingDifferent mode configuration1. Serial mode configuration: disconnect J5 J7 J6 short J4Three-wire serial mode, the pins are: GND DATA CLK LE 3.3V2. Parallel port C0.5-C16 control mode configuration: disconnect J4 J7 short J5 J63. Parallel port PUP control mode configuration: disconnect J4 J5 short J7 J6The
ProductSiteLaunchDate : 2024-05-09T07:06:16.514Z
UnspscCode : 26111700
WarrantyDescription : Manufacturer warranty for 90 day