Cart 2 india

Specification
AutoPartPosition : center
Brand : Sturdy Built
BulletPoint1 : ( Pair ) of Diamond Plate Teardrop Fenders. Overall Dimensions of 66"L x 18"H x 9"W.
BulletPoint2 : Made out of .057 aluminum tread plate.
BulletPoint3 : Fenders have a 1" round lip on back for mounting.
BulletPoint4 : Fits 14", 15" and 16" trailer tires.
BulletPoint5 : Not Intended for use on Flat Bed Trailers. Intended for use on sidewall of Cargo Trailers. PLEASE VERIFY MEASUREMENTS AND FITMENT BEFORE PURCHASE.
CircuitType : 1-way
Color : Silver
CompatibleWithVehicleType : Trailer,Boat
ConnectivityProtocol : X-10
ConnectorType : Oem
ControlMethod : touch
ExteriorFinish : Aluminum,Stainless Steel
ExternallyAssignedProductIdentifier1 : 0681541545443
ExternallyAssignedProductIdentifier2 : 681541545443
ExternallyAssignedProductIdentifier3 : 00808709225843
FitType : Universal Fit
InternationalProtectionRating : IP00
ItemDisplayDimensions_Length : 12.38 inches
ItemDisplayWeight : 2.21 pounds
ItemName : Aluminum Boat Trailer Fender or Bunk Support 17 inch for Tandem Axle
ItemPackageDimensions_Height : 30.3 centimeters
ItemPackageDimensions_Length : 13.3 centimeters
ItemPackageDimensions_Width : 23.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-fenders
Manufacturer : Sturdy Built
Material : Aluminum,Stainless Steel
ModelNumber : 22821574
MountingType : Panel Mount
NumberOfItems : 1
OperationMode : OEM
PartNumber : 22977
ProductDescription : This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.  Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
ProductSiteLaunchDate : 2022-05-27T17:24:18.055Z
Size : 66"
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Mechanical
TerminalType : Screw
UnitCount : 1
UnspscCode : 24101805