Cart 2 india

Specification
AutomotiveFitType : universal_fit
AutoPartPosition : front
Brand : Sturdy Built
BulletPoint1 : (2) Smooth Aluminum Teardrop Fenders... Overall dimensions of 72"L x 20"H x 10"W... Pair of Tandem Fenders...
BulletPoint2 : Made out of .057 aluminum...
BulletPoint3 : Fenders have a 1" round lip on backside for mounting...
BulletPoint4 : Fits 14", 15" and 16" trailer tires...
BulletPoint5 : Not Intended for use on Flat Bed Trailers... Intended for use on sidewall of Cargo Trailers... PLEASE VERIFY MEASUREMENTS AND FITMENT BEFORE PURCHASE.
BulletPoint6 : 9" Wide x 60" Long x 12" Tall
BulletPoint7 : Fits Most 13"-15" Tires
BulletPoint8 : 16 gauge galvanized steel
Color : Silver
CompatibleWithVehicleType : Boat,Trailer
ExteriorFinish : Aluminum,Stainless Steel
ExternallyAssignedProductIdentifier1 : 0681541500091
ExternallyAssignedProductIdentifier2 : 681541500091
FinishType : RAW STEEL
FitType : Universal Fit
IncludedComponents : No
ItemName : Aluminum Boat Trailer Fender or Bunk Support 15 inch for Tandem Axle
ItemPackageDimensions_Height : 19 inches
ItemPackageDimensions_Length : 72 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-fenders
Manufacturer : Sturdy Built
Material : Aluminum,Stainless Steel
ModelName : (2) 16 Gauge Tandem Trailer Fenders
ModelNumber : Fender
NumberOfItems : 1
PartNumber : 22976
ProductDescription : This is an Aluminum Tandem Axle Boat Trailer Fender support. This is solid 1/4 inch thick aluminum, meaning it will not rust! This Aluminum Fender Mount is used to support the trailer fender in the middle, between the trailer tires, typically mounting from the I-Beam of the trailer frame to the under side of the fender. These Fender supports are very commonly seen mounting Tandem Axle Aluminum Diamond Plate Trailer Fenders. There are a couple different variations of this fender support. Check the measurements on the attached  images to ensure you have the correct one. This fender bracket has pre-drilled 3/8 inch mounting holes, which would commonly use stainless steel 3/8 inch Trailer Bolts. The bends you see in this bracket are each roughly 45 Degrees, making the mounting angle of this bracket at 90 Degrees, which would support the middle of a tandem axle trailer fender perfectly. Typically on a tandem axle you would only need (1) per fender, so replacing two fenders would mean needing two of these supports.  Occasionally, you will also see these brackets used to help support and stabilize the large bunks on boat trailers that have been designed with the bunks mounted on top of the aluminum I-Beam frame.
ProductSiteLaunchDate : 2022-05-27T17:24:18.055Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101805
WarrantyDescription : No Warranty