Cart 2 india

Specification
Brand : CME Tools
BulletPoint : 3" face mill R200, w. 5 Sandvik RCKT1204 inserts, w. MT3 arbor#506-R200-3-new
BulletPoint1 : 2" Cutting Diameter; 45 Degree Cutting Angle; 3 Flutes; 3/4" Mounting Bore
BulletPoint2 : SEAN42 INSERTS; Comes with 3 high quality SEAN42 Coated Carbide Inserts pre-installed; Excellent steel cutting performance
BulletPoint3 : 45 DEGREE ENTERING ANGLE; Recommended cutter for general purpose face milling; Balanced axial and radial forces for minimal vibration and chatter; Better surface finishes and higher feed rates possible
BulletPoint4 : MT3 HOLDER; Comes with a compatible high quality MT3 arbor designed for face mills with a mounting bore diameter of 3/4"
BulletPoint5 : COMPATIBILITY; Guaranteed compatibility with all SEAN42 inserts
Color : Black
CutType1 : Rounded
CutType2 : Taper
CutType3 : Finishing
DrawerType : Under Mount
ExternallyAssignedProductIdentifier : 8431271485579
ExternallyAssignedProductIdentifier1 : 0765875233303
ExternallyAssignedProductIdentifier2 : 765875233303
IncludedComponents : (1) Drilling guide (1) 6mm brad point drill bit (2) 2.5mm brad point drill bits (1) 6mm stop collar (1) 2.5mm stop collar (1) Hex wrench (1) Set of instructions
ItemName : CME 2" 45° Indexable Face Mill w/ MT3 Arbor, SEAN42 Inserts Included, 3 Flutes
ItemPackageDimensions_Height : 15.3924 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 12.3952 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : face-mill-holders
Manufacturer : CME Tools
Material : high carbon steel
Material1 : Steel
Material2 : Tungsten Carbide
ModelName : Plastic End Caps
ModelNumber : Plastic Hole Plugs
MountingType : Under Mount
NumberOfFlutes : 3
NumberOfItems : 3
PackageLevel : unit
PartNumber : 506-FMS-2-MT3
ProductDescription : unique design



Intermediate through hole, which is good for water discharge, increase earthquake resistance, and shockproof

Flat milling cutter straight section, shafting male shaft W, FMB for metric bore cutter

Suitable for face milling

Customizable unconventional length and taper shank diameter

Tool holder accuracy check precautions



Use high-precision measuring tools, at least 0.002mm The spindle test rod is based on the national standard, and the concentricity yaw should be controlled within 0.005 when it is 300mm. And need to use tungsten steel bars with shank diameter tolerance within h6 When the tool holder holds the standard rod, it should be carried out according to the instructions, so as to avoid improper clamping, resulting in inaccurate measurement and error. International standard measures yaw accuracy, measurement should be 4 times the diameter of the clamping shank


ProductSiteLaunchDate : 2022-08-02T14:32:55.812Z
Size : 2 in
Style : SEAN42
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803