SpecificationAgeRangeDescription : little_kid
Brand : HOLMZCED
BulletPoint1 : High Quality Material: This eye wash station is made of high-quality brushed 304 stainless steel with polishing and laser welding processes, impact-resistant, not easy to deform, and can be used for a long time without frequent replacement.
BulletPoint2 : High-efficiency Eyewash: The eye washer adopts a double nozzle design, and the working pressure is 0.2-0.4MPa, which makes its eyewash flow rate up to 3.17 gal/min, providing you with an efficient eyewash effect.
BulletPoint3 : High Safety: The nozzle has a built-in multi-layer filter that effectively filters out impurities in the water, and the water comes out in a foamy consistency, providing you with a safe and gentle cleaning process.
BulletPoint4 : Large Basin Design: The enlarged basin design (10.6in diameter) prevents water from overflowing and splashing the floor, ensuring a smooth cleaning process.
BulletPoint5 : Simple Operation: The hand push plate valve can be pushed 90°, thus allowing you to easily start and close this product. In addition, once the valve is pressed, there is no need to keep pressing it, making it easy for you to operate.
Color : As Shown
FabricType : Pet
IncludedComponents : hardware
ItemDisplayDimensions_Height : 0.39 inches
ItemDisplayDimensions_Length : 4.92 inches
ItemDisplayDimensions_Width : 31.5 inches
ItemDisplayWeight : 1.16 pounds
ItemName : HOLMZCED 2 Packs Stainless Steel Eye Wash Station, Wall Mounted Eye Washer Portable Emergency Shower Eye Washer Manual Eye Irrigation Station Silver for Lab Factory School Hospital
ItemPackageDimensions_Height : 2.95 inches
ItemPackageDimensions_Length : 8.27 inches
ItemPackageDimensions_Width : 5.91 inches
ItemTypeKeyword : industrial-and-scientific-eye-wash-units
ItemVolume : 1 cubic_centimeters
Manufacturer : TYErouTech
Material : copper
ModelName : Emergency Blankets
ModelNumber : eye wash station
NumberOfItems : 2
NumberOfLithiumMetalCells : 1
PartNumber : eye washer
Pattern : Abstract
ProductDescription :
Details
- Covers: They can effectively prevent dirt from entering the nozzles and keep them clean. They also open automatically when the water is discharged for easy operation.
- Screw Holes: They facilitate you to mount the product firmly.
Application
This product is suitable for laboratories, factories, schools, chemical plants, hospitals, and other hazardous rescue and emergency places.
Specification
Material: 304 Stainless Steel, ABS
Opening Method: Manual
Color: Silver
Process: Brushed, Polishing, Laser Welding
Style: Modern
Installation Required: Yes
Mounting Type: Wall Mounted
Inlet Drain: NPT1/2
Out Drain: NPT1-1/4
Working Pressure: 0.2-0.4MPa
Seal Pressure: 0.4MPa
Eyewash Flow Rate : 12L/3.17gal/min
Basin Diameter: 27cm/10.6in
Push Plate Size: 10*10cm/4*4in
Base Size: 24*13cm/9.4*5in
Package Size: 33*32*15cm/12.99*12.6*5.91in
Gross Weight: 2kg/4.41lbs
Net Weight: 1.5kg/3.31lbs
Package Included
2* Eye Wash Stations
Notes
1.Please check the package and size before installation.
2.Please note that emergency eye wash time should be controlled for more than 15 minutes.
3.Please note that this product can only be used with cold water.
4.Please note that the installation location should be within 49.21ft of the accident-prone area, and you can reach the flushing place within 10 seconds at running speed.
5.Please wrap the sealing tape (not included) around each part of the connection, and connect the water pipe (not included) according to the diameter of the inlet and outlet respectively.
6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
ProductSiteLaunchDate : 2024-11-29T02:55:43.008Z
Size : 12.50X7.00X6.00CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
Theme : 1
UnspscCode : 46181800