Cart 2 india

Specification
Brand : FLORIG
BulletPoint1 : Filtering shower head: Multi-layer stainless steel filter screen can filter impurities in the water, the water is soft, and the foamy water flow is clean to avoid secondary eye damage
BulletPoint2 : Main material: The eyewash is made of High-quality S304 stainless steel+outdoor special ABS powder electrostatic spraying that meets the national standard. It has excellent acid and alkali resistance and corrosion resistance, no bad safety defects, and long service life.
BulletPoint3 : Wall-mounted eyewash: wall-mounted, stainless steel thickened base, 3 stainless steel screws fixed, stable bracket, space saving, easy to use
BulletPoint4 : Hands Free Eye Wash: Once the stainless steel push-handle has been activated, the eye washer station's stay open ball valve allows hands-free operation. Flip top dust covers protect the spray heads.
BulletPoint5 : Dual nozzles: can provide emergency eye/face washing service for more than 15 minutes. The eyewash nozzle has a built-in double-layer filter to filter impurities in the water, provide a comfortable foamy water column, and increase the cleaning efficiency by 50%.
ExternallyAssignedProductIdentifier : 7908341347910
ItemName : FLORIG Wall Mounted Safe Eye Washer Emergency Eye Face Washing Bowl ABS Coating Stainless Steel Safety Wash Eye Face Sink with Hand-Pushing Board
ItemTypeKeyword : industrial-and-scientific-eye-wash-units
Manufacturer : FLORIG
MetalType : other
PartNumber : ynING2634636
ProductDescription : The eyewash is a safety protection product. When an accident occurs, the eyewash is quickly sprayed and rinsed to reduce the damage to a minimum . Eyewash is a necessary equipment for safety and labor protection.

Important Parameters:
Sealing pressure: 0.4MPA
Size: 31cm/12.2inch
Material: thick 304 stainless steel
Spray flow: 120-180 liters/min
Light source type: 12L/min
Working pressure: 0.2-0.4MPA
Gross weight: 3KG
Size: 300x70x260mm

Applicable conditions: normal temperature water or water that meets sanitary standards

Installation method:
1. The installation location should be within 15 meters of the accident-prone place, and it can reach the impact within 10 seconds at a running speed.
Wash place.
2. Wrap the sealing tape at the connection of each part, connect the water pipe.
3. After connecting the inlet and outlet pipes, check whether the ball valve switch is flexibly in place and whether there is jamming.

▲【prompt】:
1. Before use, open the water inlet control valve
2. When washing your eyes, please push the push plate of the eyewash switch in a clockwise direction, the eyewash valve opens, and press the counterclockwise
Pull back the push plate in the direction of the needle, and the eyewash valve closes.

Due to different measurement methods, the dimensions are slightly different, I hope you understand.
If you have any questions, please contact us and we will respond to you in time.
ProductSiteLaunchDate : 2024-07-18T03:42:57.537Z
UnitCount : 1