Cart 2 india

Specification
Brand : FLORIG
BulletPoint1 : Stainless Steel Material:High-quality 304 stainless steel+outdoor special ABS powder electrostatic spraying, durable, convenient for positioning the eyewash station.
BulletPoint2 : Eye Wash Bowl : The wall mount eye wash station features two strategically placed aerated spray heads that provide a steady and comfortable flow of water. The firm yet soft stream provides a more comprehensive cleaning power for the facial area. This feature fulfills the recommended 15 minutes of emergency eye washing.
BulletPoint3 : Wall-mounted eye wash device is easy to install and covers a small area. The simple eye wash safety solution should be wall mounted in an accessible position. With dust-proof flip design.
BulletPoint4 : Hand-free Eye/face Washing:Once activated, the eye washer will spray out two continuous foamy flows, realizing hand-free eye/face washing, avoid second-contaminate&hurt of eyes by hands.
BulletPoint5 : Easy Installation: SS304 stainless steel+ABS coating, Simple to assemble, need water plumbing connection, suitable for outdoor/indoor wall mount.
ExternallyAssignedProductIdentifier : 7908341347651
ItemName : FLORIG Emergency Eye Wash Station with Bowl Wall Mounted Stainless Steel Eyewash Station with Dual Spray Heads First Aid for Eyes Yellow
ItemTypeKeyword : industrial-and-scientific-eye-wash-units
Manufacturer : FLORIG
MetalType : other
PartNumber : ynING2634607
ProductDescription : The eyewash is a safety protection product. When an accident occurs, the eyewash is quickly sprayed and rinsed to reduce the damage to a minimum . Eyewash is a necessary equipment for safety and labor protection.

Important Parameters:
Sealing pressure: 0.4MPA
Size: 31cm/12.2inch
Material: thick 304 stainless steel
Spray flow: 120-180 liters/min
Light source type: 12L/min
Working pressure: 0.2-0.4MPA
Gross weight: 3KG
Size: 310mm/12.2inch

Applicable conditions: normal temperature water or water that meets sanitary standards

Installation method:
1. The installation location should be within 15 meters of the accident-prone place, and it can reach the impact within 10 seconds at a running speed.
Wash place.
2. Wrap the sealing tape at the connection of each part, connect the water pipe.
3. After connecting the inlet and outlet pipes, check whether the ball valve switch is flexibly in place and whether there is jamming.

▲【prompt】:
1. Before use, open the water inlet control valve
2. When washing your eyes, please push the push plate of the eyewash switch in a clockwise direction, the eyewash valve opens, and press the counterclockwise
Pull back the push plate in the direction of the needle, and the eyewash valve closes.

Due to different measurement methods, the dimensions are slightly different, I hope you understand.
If you have any questions, please contact us and we will respond to you in time.
ProductSiteLaunchDate : 2024-07-18T03:42:57.495Z
UnitCount : 1