Cart 2 india

Specification
Brand : JMT
BulletPoint1 : Motherboard Requirement: Motherboard Must Support PCIe Bifurcation, Motherboard Must be set as X4X4X4X4 or X4X4X8.
BulletPoint2 : Only supports motherboards with detachable PCI-E channels. Control the operation of two SSD based on the motherboard PCIE channel, The motherboard without PCIE signal split can only recognize one disk.
BulletPoint3 : The product does not support hardware raid, the product only supports the formation of virtual raid under win10 system, or the use of other third-party software to build raid.
BulletPoint4 : Dual nvme SSD design, Stable installation, Can run 2 NVME SSD at full speed at the same time.
BulletPoint5 : The innovative design can accommodate two NVMEs of the chassis, and can support simultaneous operation.
BulletPoint6 : Compatible with IOS and Android smartphone and tablets
BulletPoint7 : Max 2pcs purchase per customer
Color : グリーン
CompatibleDevices : Desktop
CompatibleDevices1 : Laptop
CompatibleDevices2 : Desktop
CompatibleDevices3 : Tablet
CompatibleDevices4 : Smartphone
ConnectivityTechnology : SATA
ConnectivityTechnology1 : EDSFF
ConnectivityTechnology2 : U.2 SFF-8639
DataTransferRate : 5 gigabits_per_second
DigitalStorageCapacity : 512 GB
ExternallyAssignedProductIdentifier : 4712010088928
FormFactor : 2.5-inch
HardDiskFormFactor : 2.5 inches
HardwareInterface : usb
HardwareInterface1 : usb3.0
HardwareInterface2 : usb
IncludedComponents : Bracket
IncludedComponents1 : USB type c cable/ OTG adapter
IncludedComponents2 : USB Cable
InstallationType : External Hard Drive
ItemName : JMT 4 Port 7Pin SATA3.0 to PCI-E x1 Expansion Card 5Gbps Solid State IPFS Adapter Board for Desktop
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : external-solid-state-drives
Manufacturer : JMT
ModelName : Tuff Nano
ModelNumber : TuffNano500GB-GRN
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : N53069
ProductDescription : JMT 4 Port 7Pin SATA3.0 to PCI-E x1 Expansion Card 5Gbps Solid State IPFS Adapter Board for Desktop


Product Detail:
Product Name£ºDesktop graphics card interface to sata4 port expansion card
Main Control Chip£º88SE9215
Bus Speed: 5Gbps
Bus specification: PCI-E 2.0 x1  
Interface specification: SATA3 7Pin*4


Product Description:
The 88SE9215 PCIe SATA3.0 Expansion Card with four SATA Gen III 6Gb/s channel host controllers provides server-level functionality for desktops.
Each PCI-Express 2.0 lane provides up to 500MB/S throughput. using the RAID function.
SATA drivers connected to this controller can be easily configured as 4 independent ports without RAID function.


PCI Express
- PCI Express 2.0 compliant, PCIe* 2.0 endpoint device
- Supports communication speeds of 2.5 Gbps and 5.0 Gbps.
- Supports AHCI programming interface registers for SATA controllers
- Supports aggressive power management
- Supports error reporting, recovery and correction
- Supports Message Signaling Interrupt (MSI)


SATA Controller
- Conforms to Serial ATA Specification 3.1.
- Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps.
- Supports programmable transmitter signal levels.
- Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
- Supports four SATA ports.
- Supports AHCI 1.0 programming interface.
- Supports Native Command Que¡¤uing (NCQ).
- Supports port multiplier FIS-based switching or command-based switching.
- Supports partial and sleep power management states.
- Supports staggered rotation
ProductSiteLaunchDate : 2024-09-12T09:40:20.832Z
ReadSpeed : 1055 megabytes_per_second
Size : 512GB
StreetDate : 2024-09-20T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnspscCode : 43201400
WarrantyDescription : 1
WriteSpeed : 900 megabytes_per_second