Cart 2 india

Specification
Brand : CONFAST
BulletPoint1 : PRE-ASSEMBLED-Ready to install; no setting tools required
BulletPoint2 : READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
BulletPoint3 : INTERNAL THREADS-Bolt can be removed easily
BulletPoint4 : BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
BulletPoint5 : CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
BulletPoint6 : Hole diameter: 10 mm
BulletPoint7 : Dowel length: 180 mm
BulletPoint8 : Max fixable thickness: 130/110/40/20 mm
BulletPoint9 : Screw imprint: T40 torx
Color : Silver
DriveSystem : Cross
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier : 4048962237054
ExternallyAssignedProductIdentifier1 : 820274001912
ExternallyAssignedProductIdentifier2 : 0820274001912
GpsrSafetyAttestation : 1
IncludedComponents : Blister Duopower 5 x 25 S K
ItemName : CONFAST 1/2" (Inside/Screw 1/2" Diameter) Single Expansion Anchor (25 per Box)
ItemPackageDimensions_Height : 3.5 inches
ItemPackageDimensions_Length : 6.5 inches
ItemPackageDimensions_Width : 4.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : expansion-shield-anchors
Manufacturer : CONFAST
ManufacturerGrade : Grade 2
Material : Alloy Steel
Material1 : Zamac
Material2 : Zamac
Material3 : Zamac
Material4 : Zamac
Material5 : Zamac
MeasurementSystem : Metric
MetalType : Zamac
ModelName : DuoXpand 10x180 T
ModelNumber : 562160
NumberOfItems : 25
NumberOfPieces : 25
PackageLevel : unit
PartNumber : SE12
ProductDescription : Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 7/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 8-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 4-3/8" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2017-06-13T04:40:02.265Z
Size : 10x180
StreetDate : 2024-03-01T00:00:01Z
Style : flat countersunk head
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 50
UnspscCode : 31161500