Cart 2 india

Specification
Brand : DESCO
BulletPoint : ESD Mat
BulletPoint1 : New for 2024. Desco Mini Monitor 19341
BulletPoint2 : Single Workstation Continuous Monitor
BulletPoint3 : Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
BulletPoint4 : NEW Illuminated Enclosure
BulletPoint5 : Monitors the mat and worker wrist strap for continuous path to ground verification
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0721718002772
ExternallyAssignedProductIdentifier2 : 721718002772
IncludedComponents : AC Power Cord
ItemName : Desco 19341 Mini Continuous Monitor with Illuminated Enclosure
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 2
ItemShape : Round
ItemTypeKeyword : industrial-and-scientific-esd-supplies
Manufacturer : Desco
Material : Plastic, Metal
ModelNumber : 19341
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 19341
ProductDescription : New for 2024, the Desco 19341 Mini Continuous Monitor The Desco Mini Monitor is a single workstation continuous monitor. It continuously monitors the path-to-ground integrity of one operator and one ESD worksurface. Its illuminated enclosure makes the status of the operator and worksurface highly visible to the operator and supervisor. Use the Desco 19344 Ring Magnets when mounting the monitor in areas without a worksurface. The Mini Monitor is designed with Wave Distortion Technology to provide stable continuous monitoring of the path-to-ground and presence of 1 megohm resistance of an operator’s wrist strap. Audio and visual alarms activate (in less than 50 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The Mini Monitor also monitors for a worksurface path-to-ground of less than 10 megohms. All Mini Monitors are calibrated to NIST standards. Wave Distortion Technology is the Most Reliable Technology for the Continuous Monitoring of Single-Wire (Conductor) Wrist Straps “Wave Distortion” or vector impedance works by applying a continuous test voltage of 1.2 volts peak-to-peak at 1 to 2 microamperes (0.000002 amperes) to the wrist strap that is connected to the continuous or constant monitor. The test voltage creates a square wave that the monitor circuit compares to established patterns. By monitoring the “distortions”, or shape of the square wave, Wave Distortion Technology determines if the monitored circuit is complete - the operator is in the circuit and the total equivalent DC resistance is within specifications. Wave Distortion Technology produces a very fast alarm time and minimal false alarms. ANSI/ESD S20.20 section 7.3 states “Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements.” Per ANSI/ESD S1.1 Annex A.3 Daily (wrist strap system) testing may be omitted if constant monitoring used.” Per ESD Handbook ESD TR 20.20 section 5.3.2.4.4 “Typical Test programs recommend that wrist straps that are used daily should be tested daily. However, if the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required.” The Mini Monitor and its accessories are available as the following item numbers: Item Description 19341 Mini Monitor, with North American Power Adapter 19342 Mini Monitor, with Universal Power Adapter 19344 Ring Magnets, 1 Pair 98221 Wave Distortion Monitor Verification Tester 19657 Power Adapter, 100-240 VAC Input, 9 VDC 150 mA Output, North America Plug 19658 Power Adapter, 100-240 VAC Input, 9 VDC 3 A Output, IEC C14 Inlet 50545 Power Cord, Europe
ProductSiteLaunchDate : 2024-06-06T07:00:00.000Z
Size : 3m
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2