Cart 2 india

Specification
Brand : Sherline
BulletPoint1 : Easy-to-use!
BulletPoint2 : End mill holder screws onto the threaded end of a Sherline mill spindle
BulletPoint3 : Make a great "quick-change" tool system
BulletPoint4 : Nose Diameter (Decimal Inch): 0.79
BulletPoint5 : Projection (Decimal Inch): 2.5
CutType : Taper
ExternallyAssignedProductIdentifier1 : 0731236489924
ExternallyAssignedProductIdentifier2 : 731236489924
ItemName : Sherline 6083 - End Mill Holder 1/2 Inch
ItemPackageDimensions_Height : 6.5 inches
ItemPackageDimensions_Length : 2.82 inches
ItemPackageDimensions_Width : 2.82 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : end-mill-holders
Manufacturer : Sherline
Material : Aluminum
NumberOfFlutes : 3
NumberOfItems : 1
PartNumber : sher-6083
Pattern : 1/4" x 0.79
PowerSourceType : ac
ProductDescription : Sherline 6083 - End Mill Holder 1/2 Inch - SPECIAL ORDER PLEASE ALLOW AN ADDITIONAL 1-2 DAYS
This easy-to-use end mill holder screws onto the threaded end of the mill spindle. End mills are held in place with a single set screw that tightens against the flat on the side of the cutter. Because of the ease of use of this type of cutter holder and the fact that it allows the use of longer or double-ended end mills, we have also made it available for other size cutting tools as well, but most American customers will find 3/8" tools to be available in the largest volume and variety and, therefore, the lowest prices.In addition to end mills, special purpose cutters such as those designed for cutting key slots, dovetails and corner radii usually have 3/8" diameter shanks.
The Sherline end mill holder will increase the versatility of your milling machine by enabling you to hold these popular cutters.These holders also make a good "quick-change" tool system. By keeping your favorite cutter mounted up in their own holders, changing cutters is a quick operation. Just unscrew one holder from the spindle and thread on another.
Though this part may look simple, it is not easy to make. It must be made very accurately to be of any use. They are made on a CNC machine in a multi-step operation, with the threads being single-pointed rather than tapped to assure a high degree of concentricity. More details on how it is made are available in the instructions. (See the link below.)
CAUTION! Always consider power and size limitations of your equipment when using larger cutters. You may want to reduce cutter speed.

ProductSiteLaunchDate : 2015-08-07T16:51:06.890Z
Size : 1/4" x 0.79
SpecificUsesForProduct : General Purpose
Style : Direct Coolant End Mill Holder CAT40
UnitCount : 1
UnspscCode : 27110000
Voltage : 110 volts