Cart 2 india

Specification
Brand : TOPINCN
BulletPoint1 : [Long Transmission Distance] This sensor offers a long transmission distance, ensuring data collection in farming, greenhouses, and laboratories.
BulletPoint2 : [Highly Accurate Measurements] The photosynthetic active radiation sensor accurately measures radiation energy between 400-700nm, crucial for plant life activities and organic substance synthesis.
BulletPoint3 : [Strong Anti-interference] The sensor provides strong anti-interference capabilities, ensuring accurate measurements even in challenging environmental conditions.
BulletPoint4 : [ Design] Featuring a sturdy aluminum shell, this sensor is highly heat resistant, anti-aging, and designed for long-lasting durability.
BulletPoint5 : [Ip67 Rated] With superior water and damp-proof properties, this sensor is ideal for long-term outdoor use in various settings.
ItemName : Photosynthetic Sensor Transmitter, High Accuracy 400 to 700nm IP67 Photosynthetic Active Radiation Sensor for Agricultural Equipment, Solar Radiation Light Quantum Meter (DC 5V)
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemTypeKeyword : emf-meters
Manufacturer : TOPINCN
ModelName : CYSFETENAbckgevth29
ModelNumber : TOPINCNg96vmwrg1u
NumberOfItems : 1
PartNumber : TOPINCNg96vmwrg1u
ProductDescription : Spec:
Item Type: Photosynthetic Sensor Transmitter
Material: Aluminum Alloy
Weight: Approx. 292g / 10.3oz
Product Size: Approx. 65x31mm / 2.6x1.2in
Mounting Hole Distance: 57mm / 2.2in
Power Supply: DC 5V
Output Form: RS485 (for Modbus)
Spectrum Range: 400 to 700nm
Range: 0 to 1500W/m2 (Or 0 to 5000umolxm-2xs-1)
Resolution: 1W/m2 (Or umolxm-2xs-1)
Response Time: ≤5 ms (95%)
Non Linearity: ±4%
Directional Response (Corrected To Within 80° Of The Angle): ±10%
Temperature Response (-20°C to 60°C): ±5%
Annual Stability: ±3%
Spectrum Response Bandwidth: (400±10)nm to (700±10)nm
Spectrum Selectivity Error: ±5%
Response Outside The Specified Bandwidth: ≤ 10%
Protective Grade: IP67
Operating Temperature: -40 to 80°C
Relative Humidity: 0 to 100%RH
Power Consumption: ≤100mW at 5V
Troubleshooting: The meter display value is incorrect when outputting. This may be due to wiring problems or communicating serial port failure, resulting in failure to obtain the correct data. Please check whether the wiring is correct and firm, whether the serial port is occupied, and whether the serial port setting is correct
Wiring:
Output Signal: RS485
Red Wire: Power Positive
Black Wire: A+
Yellow Wire: B-
Green Wire: Power Negative

How to Use:
1. Secure the sensor onto the mounting bracket through the installation hole using screws
2. Ensure the device is parallel to the ground (adjust the screws by hand and check the level bubble status to determine if it is parallel)

Packing List:
1 x Photosynthetic Sensor Transmitter
1 x User Manual

Notice:
1. Please check the packaging for any damages and ensure that the product model matches the one you selected;
2. Do not connect the wires while they are energized. Only power on after
ProductSiteLaunchDate : 2024-09-24T17:03:25.095Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41113700