Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
A standard ¼" jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve, the pressure of the tip dictates how good the ground is, resulting in inferior sound quality (I.e., that "static sound"). Not only is the signal strength compromised and weaker, the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. With the new Pure Tone Jack, the audio jack as you know it will never be the same again. The Pure Tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. Not only is the signal much cleaner, stronger, and clearer, but all aspects of the EQ spectrum are also greatly improved while eliminating those nasty spikes. No more noise crackle caused by pressure grounds! In addition, the Pure Tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. The new standard jack has been born! The Pure Tone multi-contact jack was invented by Dave Linsk, lead guitarist of the International recording group Overkill. The jack was created as a result of constant failures of the current production jack models that have been available on the market until now. As it turns out, the 100 year old audio jack design really needed some changes to make it road worthy!
Features
1) Full-contact Output Jack with 2 concave ground contacts and 2 concave hot leads
2) The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise.
3) 100% greater surface area at all contact points creates a more stable connection; thus, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.
4) The Pure Tone jack allows for increased current handling at 500 volts for high current applications.
5) Tensioned design locks cable securely in place while the increased metal mass carries more signal.
Specification
Brand : Pure Tone Technologies
EAN : 0813263018206
Label : AP International
Manufacturer : AP International
PackageDimensions_Weight : 4.00 hundredths pounds
PackageDimensions : L:4.49 X W:1.73 X H:0.43
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : AP International
Size : 2 Output Jacks
Studio : AP International
Title : 2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
A standard ¼" jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve, the pressure of the tip dictates how good the ground is, resulting in inferior sound quality (I.e., that "static sound"). Not only is the signal strength compromised and weaker, the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. With the new Pure Tone Jack, the audio jack as you know it will never be the same again. The Pure Tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. Not only is the signal much cleaner, stronger, and clearer, but all aspects of the EQ spectrum are also greatly improved while eliminating those nasty spikes. No more noise crackle caused by pressure grounds! In addition, the Pure Tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. The new standard jack has been born! The Pure Tone multi-contact jack was invented by Dave Linsk, lead guitarist of the International recording group Overkill. The jack was created as a result of constant failures of the current production jack models that have been available on the market until now. As it turns out, the 100 year old audio jack design really needed some changes to make it road worthy!
Features
1) Full-contact Output Jack with 2 concave ground contacts and 2 concave hot leads
2) The Stereo Pure Tone jack contains dual rings for optimal signal and lowest possible noise.
3) 100% greater surface area at all contact points creates a more stable connection; thus, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.
4) The Pure Tone jack allows for increased current handling at 500 volts for high current applications.
5) Tensioned design locks cable securely in place while the increased metal mass carries more signal.
Specification
Brand : Pure Tone Technologies
EAN : 0813263018206
Label : AP International
Manufacturer : AP International
PackageDimensions_Weight : 4.00 hundredths pounds
PackageDimensions : L:4.49 X W:1.73 X H:0.43
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : AP International
Size : 2 Output Jacks
Studio : AP International
Title : 2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
