Cart 2 india

Specification
Brand : EPLZON
BulletPoint1 : Eliminate the need for tapping wires to install the load resistors.
BulletPoint2 : Operating voltage: DC 12V; Switching current: min. 0.05 max. 10 A; Switching load: 0,1-150 W; Maximum power: 150 W; Flashing frequency: 85 times/min; Working temperature: -40℃～80℃
BulletPoint3 : 2-pole LED turn signal relay made of high quality nylon and metal, durable, water and moisture resistant; Dimensions: 41 mm x 28 mm x 28 mm/1.61" x 1.1" x 1.1"; Cable length: 16 mm/6.3"
BulletPoint4 : Easy installation: Plug and play, no load resistors required, no more breakout wires to install load resistors. Waterproof design, effective heat dissipation, does not generate too much heat.
BulletPoint5 : Application: Suitable for most 12V electronic flash relays such as Honda, Kawasaki, Suzuki, Yamaha, Harley etc. (Note: Please check your relay before purchasing and make sure it is the correct module.)
BulletPoint6 : Housing Color: Comparable
ConnectorType : Plug-in Or Quick Connect
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 0791162513056
ExternallyAssignedProductIdentifier2 : 791162513056
ItemName : EPLZON 2-Pin Automatic Electronic LED Flasher Relay Fix for Motorcycle Turn Signal Light Bulbs Fast Hyper Flash
ItemPackageDimensions_Height : 15.2908 centimeters
ItemPackageDimensions_Length : 3.7084 centimeters
ItemPackageDimensions_Width : 10.8966 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-electronic-flashers
Manufacturer : EPLZON
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 12 volts
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : EP-SGQ-2PIN
MountingType : DIN Rail Mount
NumberOfItems : 1
NumberOfTerminals : 2
OperationMode : Automatic
PartNumber : EP-SGQ-2PIN
ProductDescription : EPLZON 2 Pin 12V 150W Motorcycle LED Turn Signal Relay

⏺ Effectively prevent the LED light of the car's original halogen lamp from flashing too quickly or not flashing.
⏺ On many models, flash relays can be easily replaced in minutes, no welding, cutting wires, etc. necessary.
⏺ The indicator relay only needs to replace the original relay, and only one relay is required for the entire vehicle.
⏺ After assembling the indicator, there is no need to add resistance.
⏺ Most 2-pin flashes can be replaced (if the wiring sequence is different, you can always remove the white adapter to connect the wires/pins directly).

Specification:

ProductSiteLaunchDate : 2024-07-31T07:13:22.265Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39122300
Wattage : 150 watts