Cart 2 india

Specification
Brand : Pokerty
BulletPoint1 : The module uses high-quality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.
BulletPoint2 : Using patch optocoupler isolation, strong driving ability, stable performance; current 5mA. The module working voltage is available in 5V, 9, 12V, 24V.
BulletPoint3 : The module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is broken, the relay will not move.
BulletPoint4 : Power indicator (green), relay status indicator (red). The interface design is user-friendly, all interfaces can be directly connected through the terminal block, very convenient.
BulletPoint5 : High and low selection: 1. S1 is a high-low selection for 1 relay;2. is the high and low level selection of 2 relays.3 com is shorted with low, the corresponding relay is triggered by low level, and when com is shorted with high terminal, it is triggered by high level.
Color : 12V
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 717444819463
ExternallyAssignedProductIdentifier2 : 0717444819463
ItemName : Trigger Module, 5V/12V 2 Channel Relay Module with Optocoupler Isolation High&Low Level Trigger Relay Extension Board(5V)
ItemPackageDimensions_Height : 10.2 centimeters
ItemPackageDimensions_Length : 1.8 centimeters
ItemPackageDimensions_Width : 6.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electromechanical-relays
Manufacturer : Pokerty
Material : Copper
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 12 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : Pokerty5q4b0chsmt-01
MountingType : din_rail
NationalStockNumber : 5945-01-610-6634
NumberOfItems : 2
OperationMode : Automatic
PartNumber : Pokerty5q4b0chsmt-01
ProductDescription : Specification:
Module Size:50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73in
Hole Diameter: 3.1mm/0.12in
Hole Interval Distance:44.5 x 35.5mm / 1.75 x 1.4in

Wiring Diagram:
DC+: Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).
DC-: connected to the negative pole of the power supply.
IN1:1 terminal, you can set the high or low level control relay to pull in.
IN2: 2 channel terminal, you can set the high or low level control relay to pull in.

Relay output:
NO1: 1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.
COM1:1 channel relay common interface.
NC1: 1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.
NO2: 2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.
COM2: 2 channel relay common interface.
NC2: 2-channel relay normally closed interface, short-circuit with COM2 before the relay is closed, and after the suction.

Package List:
1 x Module

ProductSiteLaunchDate : 2019-08-10T06:05:20.555Z
SpecificationMet : S1
StreetDate : 2017-06-04T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43201500