Cart 2 india

Specification
Brand : PILZ
BulletPoint1 : Instantaneous E-STOP monitoring, Limit switch, Safety gate monitoring
BulletPoint2 : Single-channel, Automatic reset, Manual reset
BulletPoint3 : Supply voltage 24 VAC/DC, 3 N/O instantaneous safety contacts
BulletPoint4 : 1 - 2 channel wiring, 1 N/C Auxiliary contact, Dimensions HxWxD 94 x 45 x 121 mm
BulletPoint5 : Number of inputs - 2, 1 Semiconductor output
Color : One Color
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 5053485186764
ExternallyAssignedProductIdentifier1 : 0091128524776
ExternallyAssignedProductIdentifier2 : 091128524776
ItemName : PNOZ X3P 24VDC/24VAC | 777310 | 777310 | PILZ Safety Relay, 1/2 Channel Wiring, 3NO, AUTO,E Stop Monitor, 24V AC/DC, W45MM, Screw Terminal
ItemPackageDimensions_Height : 16 inches
ItemPackageDimensions_Length : 23 inches
ItemPackageDimensions_Width : 18 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electromechanical-relays
Manufacturer : Pilz
Material : tile
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 24 volts
MeasurementSystem : Metric
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelName : XXBTLROI
ModelNumber : 46.52.9.024.0074
MountingType : din_rail
NumberOfItems : 1
OperationMode : Automatic
PartNumber : PNOZ X3P 24VDC/24VAC
ProductDescription :

This high-quality but affordable safety monitoring relay has been designed to run your safety circuits as efficiently as possible. Featuring 3 safety outputs, Normal Opening, 1 Auxiliary Contact, Normally Closed, and 1 Semiconductor output. Connection options include provisions for Emergency Stop Push Buttons, Reset Buttons.

This versatile safety relay meets these safety requirements ? the circuit is redundant with built-in self-monitoring. The safety function remains effective in the case of a component failure, and the correct opening and closing of the safety function relay is tested automatically in each on-off cycle.

LED indicator for switching your channel status from 1 to 2 and to monitor your supply voltage, suitable for DIN rail mounting. Not suitable for non-contact barriers.

What do Safety Relays do?

Safety relays are an electrical device that are used to reduce risk in the workplace when a fault occurs and when detection zones are interrupted, initiating a safe, reliable response from other aspects of the installation. It does this by detecting breaks in wiring and faulty contactors or actuators by sending out electrical pulses through the wiring.

Typical applications include mechanical presses, hydraulic presses, general safety circuits, emergency stop buttons and safety gates. A safety relay should ideally be installed in a control cabinet with a minimum of IP54 protection.

ProductSiteLaunchDate : 2019-07-17T11:00:02.788Z
Size : 80A
SpecificationMet : Din
UnitCount : 1
UnspscCode : 39122300