Cart 2 india

Specification
Brand : Oiyagai
BulletPoint1 : Can set high or low level trigger with jumper, to meet the demand of more trigger applications.
BulletPoint2 : With patch optical isolation, strong drive ability and stable performance, the trigger current is 5mA.
BulletPoint3 : With Fault Tolerant Design, humanized terminals, even if the control line is broken, the relay will not take any action.
BulletPoint4 : With green power light, red relay status indicator light, can directly reflect the current module working condition.
BulletPoint5 : Input voltage is 12V, the max load of interface is AC 250V/10, DC 30V/10A.
Color : 12V
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 765470383007
ExternallyAssignedProductIdentifier2 : 0765470383007
ItemName : Oiyagai 2pcs 12V 2 Channel High/Low Level Trigger with Optical Isolation Relay Module Fault Tolerant Design Load AC 250V/10A DC 30V/10A Circuit Switch Board
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electromechanical-relays
Manufacturer : Oiyagai
Material : Copper
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Metric
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : s16071200am0168
MountingType : din_rail
NationalStockNumber : 5945-01-610-6634
NumberOfItems : 2
OperationMode : Automatic
PartNumber : Oiyagai
ProductDescription : Feature:
Module Size: 50*41*18.5mm
With 4 fixed bolt holes, diameter 3.1mm, spacing 44.5*35.5mm

High and low level trigger selection:
1. S1 1 way relay high or low level trigger selection;
2. S2 2 way relay high or low level trigger selection;
3. com and low in short circuit, the relay is low level trigger, com and high end in short circuit, the relay is high level trigger.

Input Interface:
1. DC+: to connect the power positive
2. DC-: to connect the power negative
3. IN1: 1 way signal trigger end, can set the high or low level control relay
4. IN2: 2 way signal trigger end, can set the high or low level control relay

Output Interface:
1. NO1: 1 way relay normally open interface, suspend the relay before pulling, then short connect with COM1
2. COM1:1 way relay common interface
3. NC1: 1 way relay normally close interface, short connect the relay with COM1 before pulling, then suspend
4. NO2: 2 way relay normally open relay interface, suspend the relay before pulling, then short connect with COM2
5. COM2: 2 way relay common interface
6. NC2: 2 way relay normally close interface, short connect the relay with COM2 before pulling, then suspend

Package Inlcude:
2pcs 12V 2 Channel High and Low Level Trigger Relay (Red Board)
ProductSiteLaunchDate : 2017-11-28T08:00:00.000Z
SpecificationMet : S1
StreetDate : 2017-06-04T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 43201500