Cart 2 india

Specification
Brand : JPN LAMPS
BulletPoint1 : Our single-element hollow cathode lamps are quick to reach equilibrium performance, offer a long-term constant intensity, and low noise with good calibration.
BulletPoint2 : Radiation stability: 1% over 30 minutes
BulletPoint3 : Glowing starting voltage: 380V
BulletPoint4 : Size: 1.5″ lamps, Diameter: 37 mm, Length: 160 mm
BulletPoint5 : Size: 1.5″ lamps Diameter: 37 mm, Length: 160 mm
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ExternallyAssignedProductIdentifier : 7618032362510
FinishType : Finish
IncludedComponents : 1.5″ Uncoded Standard Hollow Cathode Lamp, Molybdenum, 2 Pin, Single element
ItemName : JPN LAMPS 1.5″ Uncoded Standard Hollow Cathode Lamp, Molybdenum, 2 Pin, Single Element
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 22 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lab-electrodes
Manufacturer : JPN LAMPS
Material : Material
NumberOfItems : 1
PartNumber : 818106
PowerSourceType : PowerSource
ProductDescription : Feature:
1. [PH Value Detection] Including PH electrode probe, sensor module and mount tools, used to detect the PH value of liquid.
2. [Easy Connection] PH electrode can be directly connected to PH meter, controller or PH equipment with BNC input.
3. [Real Time Reading] The PH electrode detector is accurate and reliable, and can provide real time readings.
4. [High Accuracy] The sensor module has high accuracy and sensitivity, with quick response and less interference.
5. [Multiple Usages] The detection concentration range is PH0‑14, suitable for aquariums, pools, laboratories and other occasion.


Specification:

Item Type: PH Electrode Probe
Material: PCB + ABS
Purpose: Suitable for PH value detection
Applicable Scenarios: Suitable for aquariums, pools, laboratories, etc.
Heating Voltage: 5±0.2V (AC/DC)
Working Current: 5-10mA
Detection Concentration Range: PH0-14
Detection Temperature Range: 0-80℃
Response Time: ≤5S
Stability Time: ≤60S
Component Power Consumption: ≤0.5W
Working Temperature: -10-50℃ (nominal temperature 20℃)
Working Humidity: 95%RH (nominal humidity 65%RH)
Internal Resistance: ≤250MΩ
Response Time: ≤1 minute
Terminal: BNC connector




Package List:
1 x Sensor Module
1 x PH Electrode Probe
4 x Screw
6 x Washer


Note:
After purchasing the PH sensor, you need to purchase a buffer solvent separately.
ProductDescription1 : 1.5″ Uncoded Standard Hollow Cathode Lamp, Molybdenum, 2 Pin, Single element.
ProductDescription2 : Each regular element lamp carries a 5000 mA-Hour warranty (such as Ca, Cu, MG, Ni, etc)
ProductDescription3 : Each volatile element lamp carries a 3000 mA-Hour warranty (such as As, Bi, Cd, Sb, Se, Pb, etc).
ProductDescription4 : Warranty against manufacturer defect.
ProductDescription5 : Size: 1.5″ lamps Diameter: 37 mm, Length: 160 mm
ProductSiteLaunchDate : 2024-04-26T20:03:40.045Z
SupplierDeclaredDgHzRegulation : waste
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1