Cart 2 india

Specification
Brand : HIZXMCNGH
BulletPoint : 3/6 PCS Electrode Wire Connection Line Fit for KWD-808I Electroacupuncture Parts
BulletPoint1 : For the liquid-filling composite electrode, the small plug of the liquid-filling hole should be removed, and the liquid-filling hole should be measured in the open which will help to further speed up the response speed and test accuracy of the electrode.
BulletPoint2 : Before the test, remove the protective soaking bottle rubber sleeve with soaking solution on the electrode, immerse the measuring end of the electrode in distilled water, stir and clean, then take out the electrode, and dry the residual distilled water with filter paper.
BulletPoint3 : The external reference solution must be specified on the label of the vial. If the incorrect solution is added, the electrode will be damaged and cannot be used. The electrode damaged due to the wrong solution is not guaranteed.
BulletPoint4 : The external reference solution will be consumed after a period of use of the liquid-filled composite electrode. When the height of the solution in the tube is lower than the half height of the outer tube, the external reference solution in the vial in the electrode packaging box should be filled with a into the liquid filling hole.
BulletPoint5 : Observe whether the inside of the sensitive bulb is completely filled with liquid. If any bubbles are found, the measuring end of the electrode should be gently shaken down to remove the bubbles in the sensitive bulb.
Color : 3000mm length
ControllerType : Push Button
ExternallyAssignedProductIdentifier : 7633232086264
ExternallyAssignedProductIdentifier1 : 0696484412608
ExternallyAssignedProductIdentifier2 : 696484412608
IncludedComponents : 1.5″ Uncoded Standard Hollow Cathode Lamp, Magnesium, 2 Pin, Single element.
ItemName : 0-14 Electrode Probe BNC Connector 100cm Cable For Meter Monitor Controller Test Sensor Replacement Probe Kit Monitor For Water Hydroponics
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lab-electrodes
Manufacturer : HIZXMCNGH
ModelNumber : Fybidai1uyca4evf
NumberOfItems : 1
PartNumber : HIZXMCNGH
ProductDescription : 0-14 Electrode Probe BNC Connector 100cm Cable for Meter Monitor Controller Test Sensor Replacement Probe Kit monitor for water hydroponics
Features:
Before the test, remove the protective soaking bottle rubber sleeve with soaking solution on the electrode, immerse the measuring end of the electrode in distilled water, stir and clean, then take out the electrode, and dry the residual distilled water with filter paper.
Observe whether the inside of the sensitive bulb is completely filled with liquid. If any bubbles are found, the measuring end of the electrode should be gently shaken down to remove the bubbles in the sensitive bulb.
For the liquid-filling composite electrode, the small plug of the liquid-filling hole should be removed, and the liquid-filling hole should be measured in the open which will help to further speed up the response speed and test accuracy of the electrode.
The external reference solution will be consumed after a period of use of the liquid-filled composite electrode. When the height of the solution in the tube is lower than the half height of the outer tube, the external reference solution in the vial in the electrode packaging box should be filled with a into the liquid filling hole.
The external reference solution must be specified on the label of the vial. If the incorrect solution is added, the electrode will be damaged and cannot be used. The electrode damaged due to the wrong solution is not guaranteed.

Specifications:

Bare Metal Electrode: Approx.14.7x2.5cm/ 5.75x0.98in
Cable Length: Approx.1m/39.37in
Scope of application
1. Measuring range 0-14pH (No. 8 material) 0-12pH (No. 2 material)
1. potential value 7±0.25pH (15mV)
2. Slope ≥95%
3. Internal resistance ≤250MΩ
4. Alkali error 0.2pH(1mol/L Na+ pH14)（25℃）
5. Response for time ≤10 seconds (reaching 95% of the end value,after stirring)

Package I
ProductDescription1 : 1.5″ Uncoded Standard Hollow Cathode Lamp, Magnesium, 2 Pin, Single element.
ProductDescription2 : Each regular element lamp carries a 5000 mA-Hour warranty (such as Ca, Cu, MG, Ni, etc)
ProductDescription3 : Each volatile element lamp carries a 3000 mA-Hour warranty (such as As, Bi, Cd, Sb, Se, Pb, etc).
ProductDescription4 : Warranty against manufacturing defect.
ProductSiteLaunchDate : 2024-05-18T15:29:14.000Z
SupplierDeclaredDgHzRegulation : waste
SupplierDeclaredHasProductIdentifierExemption : 1