Cart 2 india

Specification
Brand : Consfly
BulletPoint1 : Two Adjustable Hot Air Gun Clamps: Two different sizes of hot air gun clamps can meet different sizes of hot air guns. Moreover, you can also adjust the position of the hot air gun clamp at will.
BulletPoint2 : 4 Flexible Magnetic Columns: The magnetic columns are suitable for many shapes of circuit boards. The bottom of the columns are magnetic, which can be firmly sucked on the base plate to ensure the stability during the repair process. At the same time, you can also flexibly change the position and height of the magnetic post as needed.
BulletPoint3 : Stable Base Plate: The base plate is made of stainless steel, which is heavy and therefore it will not slide during use. At the same time, we will provide you with four feet, which not only ensure the base plate does not slide, but also prevent static electricity from penetrating the chip.
BulletPoint4 : Simple Operation: The hot air gun rack is easy to install and convenient to operate.
BulletPoint5 : Application: The hot air gun stand is suitable for many kinds of circuit board welding, watch repair, cell phone repair, electrical appliances repair and so on.
IncludedComponents : 1x Base Plate, 2x Hot Air Gun Clamp, 4x Magnetic Columns, 1x Pillar
ItemName : Consfly Hot Air Gun Holder, Two Flexible Brackets, Stainless Steel Base Plate, Air Heat Hand-Piece Gun Clamp for PCB Circuit Board Rework Soldering Workbench
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10.6 inches
ItemPackageDimensions_Width : 8.3 inches
ItemTypeKeyword : arc-welding-electrode-holders
Manufacturer : Consfly
ModelName : AHQ-MYY-14
ModelNumber : AHQ-MYY-14
PartNumber : Fydung5vuxbg3iz
PowerSourceType : hand_powered
ProductDescription :
Specification:
Small Air Gun Clamp: 6.22in/158mm long, 1.65in/42mm inner diameter
Large Air Gun Clamp: length 6.89in/175mm, inner diameter 2.52in/64mm
Magnet Column: 1.3in/high, 0.6in/15mm wide
Base plate: length 9.84in/250mm, width 7.87in/200mm, thickness 0.078in/2mm
Pillar:Height 9.06in/230mm
Foot: thickness 0.31in/8mm
Package Contents: 1x Base Plate, 2x Hot Air Gun Clamp, 4x Magnetic Columns, 1x Pillar

Instructions:
1.How to install the air gun holder:
(1). Put the pillar through the metal base plate and then tighten the screws.
(2). Put the aluminum alloy ring through the strut, then turn the screws tight.
(3). Turn the aluminum alloy ring loose and put the air gun in and turn the screw tight.

2. Hot air gun clamp adjustment method:
You can fix the hot air gun clamp at the right height by adjusting the fixed bolt. Then you can rotate the hot air gun clamp 360° in horizontal direction to adjust it to the position you need.

3.How to use the magnetic column:
(1). You can snap any shape of circuit board into the jaws of the magnetic column and then finish your repair operation.
(2). The bottom of the magnetic post is magnetic, so you can slide it freely on the base plate to put it at any position you want it to stay in.
(3). You can fine-tune the height of the magnetic columns by rotating the screws on the bottom with a screwdriver to make it accommodate circuit boards of different thicknesses.The magnetic column is suitable for circuit boards of any thickness between 0.0078in-0.078in(0.2mm-2mm).

4.How to use the foot pad:
Tear off the protective film of the foot pad and then stick it on the four corners of the base board.
ProductSiteLaunchDate : 2024-07-05T07:34:57.366Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1