Cart 2 india

Specification
Brand : FUTTFUTTFU
BulletPoint : Product Includes: 2 * PTFE lid 2 * chamber 2 * Stainless steel clip 6 * electrode hole sealing screw 8 * gas hole sealing screw 1 * curved luggin salt bridge 2 * glass filter aeration pipe 1 * PTFE tube φ3mm 10 * Silicone gasket 20 * fluorine rubber O-ring
BulletPoint1 : Wet method, also known as phase separation method or thermally induced phase separation method, mixes high boiling hydrocarbon liquids or low molecular weight substances with polyolefin resin, heats and dissolves the mixture, spreads the melt on the thin sheet, and then cools down to achieve phase separation. The thin sheet is oriented longitudinally or biaxially, and finally the liquid is extracted with a volatile solvent.
BulletPoint2 : It is possible to prepare interconnected microporous membrane materials, which are suitable for a wide range of materials.
BulletPoint3 : The diaphragm produced by wet biaxial stretching method has high longitudinal and transverse strength due to being subjected to biaxial stretching. Currently, it is mainly used for single-layer PE membranes.
BulletPoint4 : Nursing training educational supplies:Vascular anastomosis suture practice model has been widely used as a teaching aid for teaching, demonstration and practice, which is a thoughtful and practical gift for medical students and surgeons.
BulletPoint5 : Customizable teaching aids:If you have special teaching, practice needs, please contact us.
ContainsLiquidContents : 1
Coverage : Medium
ExternallyAssignedProductIdentifier1 : 0714855281001
ExternallyAssignedProductIdentifier2 : 714855281001
ExternallyAssignedProductIdentifier3 : 764965872385
ExternallyAssignedProductIdentifier4 : 764965872392
GpsrSafetyAttestation : 1
IncludedComponents : Lithium ion Battery Separator Single-Layer PE Separator
ItemForm : Liquid
ItemName : Lithium ion Battery Separator Single-Layer PE Separator Button Type Battery polyethylene Separator (20um×60mm×15M)
ItemPackageDimensions_Height : 2.3 inches
ItemPackageDimensions_Length : 5.1 inches
ItemPackageDimensions_Width : 3.9 inches
ItemTypeKeyword : life-science-electrocompetent-cells
LiquidVolume : 10
Manufacturer : FUTTFUTTFU
ModelName : Variable Speed Control
ModelNumber : 3050-
NumberOfItems : 1
PartNumber : Single-Layer PE Separator
ProductDescription : Overall:
PP is relatively more resistant to high temperatures, while PE is relatively resistant to low temperatures;
PP has a lower density than PE;
PP has a higher melting point and closed cell temperature than PE,
PP products are more brittle than PE;
PE is more sensitive to environmental stress

Basic performance
Material: Single layer PE film
Breathability rate: 200s
Porosity: 44%
Heat shrinkage rate: longitudinal 3%; Horizontal 1%
Tensile strength: longitudinal 1200kgf/cm2; Horizontal 1200kgf/cm2
ProductSiteLaunchDate : 2023-12-17T15:34:28.906Z
Size : 20um×60mm×15M
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111700