Cart 2 india

Specification
AgeRangeDescription : adult
Brand : sujeniir
BulletPoint1 : Use, maintenance and precautions
BulletPoint10 : <3.5nm
BulletPoint2 : A. When the electrode is used, the rubber plug and rubber cap of the hole at the upper and lower ends of the electrode should be pulled out to prevent the diffusion potential from affecting the test results.
BulletPoint3 : B. There should be no bubbles in the salt bridge solution in the electrode to prevent the solution from short circuit. The electrode of saturated salt bridge solution model should retain a little crystal to ensure the saturation requirements.
BulletPoint4 : C. When using the double salt bridge electrode, the rubber plug and rubber cap must be used. In the second section, the salt bridge solution is put into the appropriate inert electrolyte solution, and then it is put into use to ensure the accuracy of the test results.
BulletPoint5 : D. When there is salt bridge solution or crystal on the electrode shell, it should be removed at any time.
BulletPoint6 : <3%
BulletPoint7 : <240ppm
BulletPoint8 : Specific surface area:>83m2/g
BulletPoint9 : <0.32g/cc
Color : A
ExternallyAssignedProductIdentifier : 4083928407003
ItemName : sujeniir Type H Sealed Cell. H-Type Exchangeable ion-Exchange Membrane Sealed electrolytic Cell. Electrochemical Matching Electrode.(A)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-electrochemistry-accessories
Manufacturer : sujeniir
ModelName : sujeniir23905
ModelNumber : sujeniir23905
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : sujeniir23905
ProductDescription : Selling Point
Product introduction:
A: 10mmx10mmx0.1mm platinum electrode
B: 10 mm x 10 mm platinum mesh electrode
C: electrode clamp
D: 3mm glassy carbon electrode
E: proton membrane
F: double salt bridge saturated calomel electrode
G: mercurous sulfate electrode
H: Ag / AgCl reference electrode
Product features:
1. Electrolytic cell
(1). Product Name: H-type exchangeable ion-exchange membrane sealed electrolytic cell.
(2). Product material: the electrolytic cell is made of glass and the cover is made of polytetrafluoroethylene (PTEF).
(3). The volume indicated by the product in the link: 50ml, 100ml, which refers to the volume of one cell in the H type electrolytic cell. The volume of a set of electrolytic cell is 50ml + 50ml, 100ml + 100ml. And so on.
(4). The electrode hole on the cover includes three 6.2mm electrode holes (standard 6mm electrode), two 3mm air inlet and air outlet holes.
(5). Other accessories include:
Electrode plug, gas pipe (the hole that cannot be used can be plugged with plug), 1 steel clip, 1 rubber gasket.
2. Platinum electrode. Specification of platinum sheet: 10mmx10mmx0.1mm, platinum Purity: 99.99%; electrode rod: polytetrafluoroethylene, diameter: 6mm, length: 80mm; purity of gold-plated terminal: 15mm
3. Platinum mesh electrode. The specification of platinum mesh is 10mmx10 mm, and the mesh of platinum mesh is 52 mesh; the electrode rod is made of polytetrafluoroethylene, with diameter of 6mm and length of 80mm; the purity of gold-plated terminal is 15mm.
4.electrode clamp. The electrode clamp is embedded with platinum plate of 10mmx15mm; the sheath material is polytetrafluoroethylene with diameter of 6mm and length of 80mm. The purity of gold-plated terminal is 15mm
5. Glass carbon electrode. Glass carbon diameter is 3mm; total length is about 65mm; copper rod polishing joint is about 5mm; polytetrafluoroethylene outer tube diameter is about 4mm.ProductSiteLaunchDate : 2024-10-17T05:09:45.283Z
Size : One Size
UnitCount : 1
UnspscCode : 52140000